Dormer Threading Tap, M3 Thread, Metric Standard
- RS-stocknr.:
- 272-9293
- Fabrikantnummer:
- E650M3
- Fabrikant:
- Dormer
Subtotaal (1 eenheid)*
€ 38,04
(excl. BTW)
€ 46,03
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 38,04 |
*prijsindicatie
- RS-stocknr.:
- 272-9293
- Fabrikantnummer:
- E650M3
- Fabrikant:
- Dormer
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Dormer | |
| Product Type | Threading Tap | |
| Thread Size | M3 | |
| Sub Type | Drill Tap Combination Tool | |
| Thread Standard | Metric | |
| Thread Direction | Right Hand | |
| Overall Length | 56mm | |
| Material | High Speed Steel | |
| Shank Diameter | 3.15mm | |
| Finish | Steam Tempered | |
| Tap Chamfer | Bottom | |
| Standards/Approvals | No | |
| Pitch | 500μm | |
| Alles selecteren | ||
|---|---|---|
Merk Dormer | ||
Product Type Threading Tap | ||
Thread Size M3 | ||
Sub Type Drill Tap Combination Tool | ||
Thread Standard Metric | ||
Thread Direction Right Hand | ||
Overall Length 56mm | ||
Material High Speed Steel | ||
Shank Diameter 3.15mm | ||
Finish Steam Tempered | ||
Tap Chamfer Bottom | ||
Standards/Approvals No | ||
Pitch 500μm | ||
Vrijgesteld
- Land van herkomst:
- BR
The Dormer Combination drill tap is available with a 30 degree spiral flute. The combination of a core hole drill and tap to produce a thread in one pass. This significantly reduces the time needed to produce the thread on site with the use of a hand held power tool. There is no need for a tap wrench or tool change. Steam tempered surface acts to retain the lubricant and provide smoother cutting.
ISO Dormer standard
Spiral flute geometry
Semi bottoming tap chamfer
Right hand rotation and cutting
Thread form and metric coarse
Gerelateerde Links
- Dormer Threading Tap Metric Standard, Machine Tap
- Dormer Threading Tap Metric Coarse Standard
- Dormer Threading Tap Metric Coarse Standard, Machine Tap
- Dormer Threading Tap Metric Coarse Standard, Hand Tap
- Dormer Threading Tap Metric Fine Standard, Machine Tap
- Dormer Threading Tap Metric Fine Standard, Hand Tap
- Dormer Threading Tap Metric Standard
- Dormer Threading Tap Metric Standard