United Automation DMFC12 230VAC, Thyristor Trigger Module
- RS-stocknr.:
- 669-6020
- Fabrikantnummer:
- DMFC12 230VAC
- Fabrikant:
- United Automation
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 99,97
(excl. BTW)
€ 120,96
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 9 stuk(s) vanaf 05 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 1 | € 99,97 |
| 2 - 4 | € 98,16 |
| 5 - 9 | € 94,18 |
| 10 - 19 | € 86,47 |
| 20 + | € 81,88 |
*prijsindicatie
- RS-stocknr.:
- 669-6020
- Fabrikantnummer:
- DMFC12 230VAC
- Fabrikant:
- United Automation
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | United Automation | |
| Mounting Type | DIN Rail | |
| Input Voltage AC | 24V ac | |
| Input Voltage DC | 24V dc | |
| Pin Count | 11 | |
| Dimensions | 122 x 70 x 56mm | |
| Maximum Operating Temperature | +70 °C | |
| Alles selecteren | ||
|---|---|---|
Merk United Automation | ||
Mounting Type DIN Rail | ||
Input Voltage AC 24V ac | ||
Input Voltage DC 24V dc | ||
Pin Count 11 | ||
Dimensions 122 x 70 x 56mm | ||
Maximum Operating Temperature +70 °C | ||
- Land van herkomst:
- GB
Dual Mode Firing Circuit, DMFC12
The DMFC12 is a single phase or phase-to-phase trigger module with the option of Phase Angle or Burst Fire Control, or a combination of the two i.e. start up in phase angle and then continue in burst firing.
Standard Din Rail mount
Phase Angle and Burst Fire Control, or Combination of both
Soft-Start 0-30 seconds adjustable
Current limit (using external CT/Hall-effect device)
Enable input (volt-free)
0-5V/0-10V, 0-20mA/4-20mA or potentiometer input signal
24Vdc or 18-24Vac supply
Output power span and zero adjustment
Phase Angle and Burst Fire Control, or Combination of both
Soft-Start 0-30 seconds adjustable
Current limit (using external CT/Hall-effect device)
Enable input (volt-free)
0-5V/0-10V, 0-20mA/4-20mA or potentiometer input signal
24Vdc or 18-24Vac supply
Output power span and zero adjustment
The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.
Gerelateerde Links
- United Automation DMFC12 415VAC, Thyristor Trigger Module
- United Automation FC11BL, Thyristor Trigger Module
- United Automation DMFC36, Thyristor Trigger Module
- United Automation FC11AL, Thyristor Trigger Module
- United Automation FC36M, Thyristor Trigger Module
- United Automation MAT, Thyristor Trigger Module
- United Automation A34462, Thyristor Trigger Module
- United Automation AFM11, Thyristor Trigger Module
