SKF PHG 1040-8M-30 Timing Belt 130 Teeth, 1040 mm Length, 30 mm Width
- RS-stocknr.:
- 464-545
- Fabrikantnummer:
- PHG 1040-8M-30
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 28,02
(excl. BTW)
€ 33,90
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 10 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 28,02 |
*prijsindicatie
- RS-stocknr.:
- 464-545
- Fabrikantnummer:
- PHG 1040-8M-30
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Timing Belt | |
| Belt Section | 8M | |
| Pitch | 8mm | |
| Number of Teeth | 130 | |
| Cord Material | Fibreglass | |
| Series | PHG | |
| Belt Length | 1040mm | |
| Pitch Length | 8mm | |
| Belt Width | 30mm | |
| Standards/Approvals | RoHS | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Timing Belt | ||
Belt Section 8M | ||
Pitch 8mm | ||
Number of Teeth 130 | ||
Cord Material Fibreglass | ||
Series PHG | ||
Belt Length 1040mm | ||
Pitch Length 8mm | ||
Belt Width 30mm | ||
Standards/Approvals RoHS | ||
- Land van herkomst:
- CN
SKF PHG Series Timing Belt, 1040mm Belt Length, 30mm Belt Width - PHG 1040-8M-30
This timing belt transmits rotary motion between pulleys in precision power-transmission systems and is designed for use where synchronised drive is required. It features a toothed profile compatible with matching pulley sprockets and is intended for industrial setups that demand consistent positional accuracy and repeatable timing.
Features and Benefits:
• 8mm pitch provides consistent engagement and reduced backlash
• Fibreglass cord offers enhanced tensile strength and low elongation
• 130 teeth deliver fine incremental motion control
• RoHS compliance limits restricted substances in material
• 30mm width increases contact area for load distribution
• Fibreglass cord offers enhanced tensile strength and low elongation
• 130 teeth deliver fine incremental motion control
• RoHS compliance limits restricted substances in material
• 30mm width increases contact area for load distribution
Applications
• Used for conveyor indexing where repeatable positioning is required
• Suitable for automated assembly equipment requiring synchronised motion
• Ideal for stepper-driven systems demanding accurate tooth engagement
• Can be used in packaging machines needing stable transmission
• Used with timing pulleys in precision printing mechanisms
• Suitable for automated assembly equipment requiring synchronised motion
• Ideal for stepper-driven systems demanding accurate tooth engagement
• Can be used in packaging machines needing stable transmission
• Used with timing pulleys in precision printing mechanisms
What materials contribute to the belt's tensile stability?
Tensile stability is provided by the fibreglass cord reinforcement embedded within the belt body.
How does tooth count affect motion resolution?
A higher tooth count results in smaller angular increments per tooth, enabling finer positional control.
Which attribute reduces environmental contaminants in the belt?
Conformity with RoHS limits specific hazardous substances used in the belt's composition.
How does pitch influence pulley selection?
The 8mm pitch determines the compatible pulley tooth spacing and must match pulley geometry for proper meshing.
Gerelateerde Links
- SKF PHG 1040-8M-20 Timing Belt 130 Teeth 20 mm Width
- SKF PHG 1040-8M-S450 Timing Belt 130 Teeth 450 mm Width
- SKF PHG 1040-8M-50 Timing Belt 130 Teeth 50 mm Width
- OPTIBELT 1040 8M 30 Timing Belt 130 Teeth 30 mm Width
- OPTIBELT 1040 8M 30 HILO Timing Belt 130 Teeth 30 mm Width
- OPTIBELT 1040 8M 30 HIPO Timing Belt 130 Teeth 30 mm Width
- SKF PHG 480-8M-30 Timing Belt 60 Teeth 30 mm Width
- SKF PHG 760-8M-30 Timing Belt 95 Teeth 30 mm Width