OPTIBELT 570 H 100 Timing Belt 114 Teeth, 1447.8 mm Length, 25.4 mm Width
- RS-stocknr.:
- 204-2912
- Fabrikantnummer:
- 570 H 100
- Fabrikant:
- OPTIBELT
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 40,26
(excl. BTW)
€ 48,71
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 3 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 6 stuk(s) vanaf 01 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 40,26 |
| 5 - 9 | € 38,65 |
| 10 - 24 | € 37,80 |
| 25 + | € 37,00 |
*prijsindicatie
- RS-stocknr.:
- 204-2912
- Fabrikantnummer:
- 570 H 100
- Fabrikant:
- OPTIBELT
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | OPTIBELT | |
| Product Type | Timing Belt | |
| Belt Section | H | |
| Pitch | 12.7mm | |
| Number of Teeth | 114 | |
| Material | Rubber | |
| Cord Material | Fibreglass | |
| Series | ZR | |
| Pitch Length | 12.7mm | |
| Minimum Operating Temperature | -30°C | |
| Belt Length | 1447.8mm | |
| Belt Width | 25.4mm | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | ISO 5296/ISO 5294 | |
| Alles selecteren | ||
|---|---|---|
Merk OPTIBELT | ||
Product Type Timing Belt | ||
Belt Section H | ||
Pitch 12.7mm | ||
Number of Teeth 114 | ||
Material Rubber | ||
Cord Material Fibreglass | ||
Series ZR | ||
Pitch Length 12.7mm | ||
Minimum Operating Temperature -30°C | ||
Belt Length 1447.8mm | ||
Belt Width 25.4mm | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals ISO 5296/ISO 5294 | ||
The Optibelt Timing Belt has 1447mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 1447mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Gerelateerde Links
- SKF PHG 570-H-100 Timing Belt 114 Teeth 25.4 mm Width
- OPTIBELT 570 H 150 Timing Belt 114 Teeth 38.1 mm Width
- OPTIBELT 570 H 200 Timing Belt 114 Teeth 50.8 mm Width
- OPTIBELT 570 H 075 Timing Belt 114 Teeth 19.1 mm Width
- OPTIBELT 570 H 300 Timing Belt 114 Teeth 76.2 mm Width
- OPTIBELT 570 DH 300 Double Sided Timing Belt 114 Teeth 76.2 mm Width
- OPTIBELT 570 DH 075 Double Sided Timing Belt 114 Teeth 19.1 mm Width
- OPTIBELT 570 DH 200 Double Sided Timing Belt 114 Teeth 50.8 mm Width