OPTIBELT 225 L 075 Timing Belt 60 Teeth, 571 mm Length, 19.1 mm Width
- RS-stocknr.:
- 204-3194
- Fabrikantnummer:
- 225 L 075
- Fabrikant:
- OPTIBELT
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 14,60
(excl. BTW)
€ 17,67
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 17 stuk(s) vanaf 04 mei 2026
- Plus verzending 23 stuk(s) vanaf 04 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 14,60 |
| 5 - 9 | € 14,04 |
| 10 - 24 | € 13,73 |
| 25 + | € 13,43 |
*prijsindicatie
- RS-stocknr.:
- 204-3194
- Fabrikantnummer:
- 225 L 075
- Fabrikant:
- OPTIBELT
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | OPTIBELT | |
| Product Type | Timing Belt | |
| Belt Section | L | |
| Pitch | 9.5mm | |
| Number of Teeth | 60 | |
| Cord Material | Fibreglass | |
| Material | Rubber | |
| Series | ZR | |
| Belt Length | 571mm | |
| Minimum Operating Temperature | -30°C | |
| Belt Width | 19.1mm | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | ISO 5296/ISO 5294 | |
| Alles selecteren | ||
|---|---|---|
Merk OPTIBELT | ||
Product Type Timing Belt | ||
Belt Section L | ||
Pitch 9.5mm | ||
Number of Teeth 60 | ||
Cord Material Fibreglass | ||
Material Rubber | ||
Series ZR | ||
Belt Length 571mm | ||
Minimum Operating Temperature -30°C | ||
Belt Width 19.1mm | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals ISO 5296/ISO 5294 | ||
The Optibelt Timing Belt has 571mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 571mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Gerelateerde Links
- OPTIBELT 225 DL 075 Double Sided Timing Belt 60 Teeth 19.1 mm Width
- OPTIBELT K225 L 075 Timing Belt 60 Teeth 19 mm Width
- OPTIBELT 225 L 050 Timing Belt 60 Teeth 12.7 mm Width
- OPTIBELT 225 L 100 Timing Belt 60 Teeth 25 mm Width
- OPTIBELT 1120 H 075 Timing Belt 224 Teeth 19.1 mm Width
- OPTIBELT 315 H 075 Timing Belt 63 Teeth 19.1 mm Width
- OPTIBELT 580 H 075 Timing Belt 116 Teeth 19.1 mm Width
- OPTIBELT 540 L 075 Timing Belt 144 Teeth 19.1 mm Width