Water Proof Sealing Cap Toggle Switch Boot

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Single Pole, Type MTA / STA

Miniature panel mount toggle switches
Copper alloy, silver plated solder tags
M6 x 0.75 bushing with locking plate, key 9 mm
Insulation resistance: > 1000 MΩ at 500 Vdc
Dielectric strength: 1500 V, 50 Hz for 1 minute
Chrome plated brass actuator and Diallyl Phthalate (UL 94 V-0) case

Torque: returns to original position when load removed.
Latching: remain in their new position when load removed
Miniature toggle switches  
Load: 3 A, 250 V, 6 A, 125 V
  4 A, 30 V=, 5 A, 12 V=
  6 A, 6 V=
Contact Resistance: < 10 mΩ @ 2-4 V, 1 A
Insulation resistance: 500 MΩ/500 V=
Test voltage: 1000 Vpow
Temperature range: -45°C* to +140°C
Service life: >300,000 functions
Switch material: Ag, (silver) centre contact in AgCu
  Silver-Plated Copper
Connection: Solder connection on base
Material: Phenol formaldehyde
  Chrome-plated lever
  Nickel-plated brackets
  Rotary fuse with special disc
Fixing Holes: Ø 6.2 mm
Dimensions: See drawing
Recommended soldering temperature: +270°C for 7 sec, max.

Note

For biased switches '(on)' refers to momentary 'on' position

Toggle Switch Boot

From Knitter Switch, the ET102 is a waterproof toggle switch boot complete with mounting nut. With a height of 14.2 mm, this toggle switch boot is suitable for use with the MTA series.

Specificaties
Kenmerk Waarde
Accessory Type Water Proof Sealing Cap
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
161 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,15
(excl. BTW)
5,02
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 4,15
15 - 49
€ 3,93
50 - 99
€ 2,17
100 - 249
€ 2,04
250 +
€ 1,84
Verpakkingsopties
Related Products
Marquardt 1820 series single and double pole toggle ...
Description:
Marquardt 1820 series single and double pole toggle switches. The 1820 toggle switches are suitable for use in Class II appliances and are available in a choice of SPST, SPDT, DPST or DPDT switching formats including SPDT center off changeover ...
Splashproof switch covers to fit toggles with a ...
Description:
Splashproof switch covers to fit toggles with a 0.468 in dia. bushMoulded in black flexible PVC threaded insertHalf cover leaves end of toggle exposed whilst maintaining seal on shaftThis is especially useful where high wear on the switch is envisaged. ...
Long lever momentary action switch for use with ...
Description:
Long lever momentary action switch for use with joystick-type sealing cap.Ergonomic shape and materials.Front face fully insulated and sealed (IP 65).
MTA Series panel mounting toggle switches with high ...
Description:
MTA Series panel mounting toggle switches with high temperature green UL 94V-0 housings and long baton style actuators with 1/4 - 40 threaded bushings. These MTA series panel mounting toggle switches are vertical mount with wire lug terminals. Gold flash ...