Honeywell Toggle Switch, Bushing Mount, On-On, SPDT, Screw Terminal, 277 V ac

RS-stocknr.:: 187-3487
Artikelnummer Distrelec:: 301-31-751
Fabrikantnummer:: 1NT1-3
Fabrikant:: Honeywell

Honeywell Toggle Switch, Bushing Mount, On-On, SPDT, Screw Terminal, 277 V ac

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 24,48

(excl. BTW)

€ 29,62

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Beperkte voorraad

21 resterend, klaar voor verzending
136 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 49	€ 24,48
50 - 99	€ 22,81
100 +	€ 20,79

*prijsindicatie

RS-stocknr.:: 187-3487
Artikelnummer Distrelec:: 301-31-751
Fabrikantnummer:: 1NT1-3
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Toggle Switch
	Contact Configuration	SPDT
	Switch Operation	On-On
	Switch Contact Current	15A
	Mount Type	Bushing
	Terminal Type	Screw
	IP Rating	IP68, IP67
	Illuminated	No
	Panel Cutout Size	12.4 mm
	Actuator Length	17mm
	Contact AC Voltage	277V ac
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	71°C
	Standards/Approvals	CSA, UL, CE
	Width	33.5mm
	Length	22mm
	Height	26.7mm
	Series	NT

	Alles selecteren
	Merk Honeywell
	Product Type Toggle Switch
	Contact Configuration SPDT
	Switch Operation On-On
	Switch Contact Current 15A
	Mount Type Bushing
	Terminal Type Screw
	IP Rating IP68, IP67
	Illuminated No
	Panel Cutout Size 12.4 mm
	Actuator Length 17mm
	Contact AC Voltage 277V ac
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 71°C
	Standards/Approvals CSA, UL, CE
	Width 33.5mm
	Length 22mm
	Height 26.7mm
	Series NT

Datasheet 1NT1-3

Land van herkomst:: US

Honeywell Series NT Toggle Switch, 15A Switch Contact Current, IP68 - 1NT1-3

This toggle switch provides a manual two-position changeover mechanism intended for industrial control panels and equipment that require a simple on–on selection. It is designed for panel installation with a threaded bushing mounting style and utilises screw‑type terminations for secure wiring in electrical and automation assemblies.

Features and Benefits:

• SPDT contact arrangement enabling single‑pole changeover functionality
• Rated for 15 A current to handle higher load circuits
• Contact voltage capability up to 277V AC for mains applications
• Temperature range from −40 to 71 °C for varied environment operation
• IP68, IP67 ingress protection for exposure to water and dust
• Meets CSA, UL, CE approvals for regulated installations

Applications

• Suitable for control panels in factory automation systems
• Ideal for switching mains‑fed actuator circuits
• Used with distribution equipment requiring manual changeover
• Can be used for marine or outdoor enclosures needing ingress protection
• Suitable for maintenance panels where screw terminals simplify rewiring

What mounting hole size is required for installation?

The panel cut‑out dimension required for fitting the threaded bushing is 12.4 mm, allowing a secure panel mount.

How does the actuator profile affect accessibility?

The actuator extends 17 mm, providing a tactile lever length that aids operator access through small panel apertures.

Which Terminal arrangement is provided for electrical connections?

Screw terminals are provided to permit standard cable lugs or stranded conductors to be clamped reliably.

What mechanical footprint should be allowed behind the panel?

The switch has a body depth and overall width requiring approximately 33.5mm lateral clearance and 22mm from front to rear envelope for mounting considerations.