Honeywell Toggle Switch, Bushing Mount, On-On, SPDT, Wire Terminal, 28 V dc, 125 V ac

RS-stocknr.:: 212-5154
Artikelnummer Distrelec:: 304-55-818
Fabrikantnummer:: 101TL2-3
Fabrikant:: Honeywell

Honeywell Toggle Switch, Bushing Mount, On-On, SPDT, Wire Terminal, 28 V dc, 125 V ac

Subtotaal (1 doos van 20 eenheden)*

€ 2.405,22

(excl. BTW)

€ 2.910,32

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 28 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Dozen	Per Doos	Per stuk*
1 +	€ 2.405,22	€ 120,261

*prijsindicatie

RS-stocknr.:: 212-5154
Artikelnummer Distrelec:: 304-55-818
Fabrikantnummer:: 101TL2-3
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Contact Configuration	SPDT
	Product Type	Toggle Switch
	Switch Operation	On-On
	Switch Contact Current	20A
	Mount Type	Bushing
	Terminal Type	Wire
	Illuminated	No
	Contact AC Voltage	125V ac
	Contact DC Voltage	28V dc
	Actuator Length	17.27mm
	Minimum Operating Temperature	71°C
	Maximum Operating Temperature	-65°C
	Switch Configuration	On-On
	Standards/Approvals	UL, CSA, CE
	Width	33.5mm
	Series	TL
	Length	30mm
	Height	26.7mm

	Alles selecteren
	Merk Honeywell
	Contact Configuration SPDT
	Product Type Toggle Switch
	Switch Operation On-On
	Switch Contact Current 20A
	Mount Type Bushing
	Terminal Type Wire
	Illuminated No
	Contact AC Voltage 125V ac
	Contact DC Voltage 28V dc
	Actuator Length 17.27mm
	Minimum Operating Temperature 71°C
	Maximum Operating Temperature -65°C
	Switch Configuration On-On
	Standards/Approvals UL, CSA, CE
	Width 33.5mm
	Series TL
	Length 30mm
	Height 26.7mm

Datasheet - 101TL2-3

N.v.t.

Honeywell Series TL Toggle Switch, 20A Current Rating, 125V AC Contact Ac Voltage - 101TL2-3

This toggle switch provides a simple mechanical method to select between two circuits in industrial control and equipment panels. Designed for panel installation with a bushing mount, it delivers manual two-position switching suitable for a variety of electrical control tasks where a compact, non-illuminated actuator is required.

Features and Benefits:

• SPDT contact arrangement offers single-pole dual-circuit selection
• 20A contact rating enables high-current switching in control circuits
• 125V AC contact capability supports common mains-level loads
• 28V DC compatibility permits use in low-voltage control systems
• IWTS Terminal style allows reliable wire-to-switch connections
• On-On operation provides a straightforward maintained switching action

Applications

• Suitable for motor starter control panels in industrial automation
• Ideal for switching auxiliary circuits in electrical distribution gear
• Used for mode selection in mechanical equipment control stations
• Can be used for manual override in packaged control systems
• Used with low-voltage DC control racks for status selection

What range of ambient temperatures can it withstand during operation?

It operates across a wide thermal span from -65°C up to 71°C, allowing deployment in both cold storage and warm machinery enclosures.

What approvals indicate its acceptance for regulated installations?

It carries UL, CSA and CE approvals for conformity with recognised safety and performance criteria.

What physical clearance should be considered for panel depth and access?

The actuator projects 17.27mm beyond the panel face, so allow adequate front access for manual operation.

Which physical footprint dimensions matter when planning panel cut-outs?

The overall envelope measures 33.5mm in width, 30mm in length and 26.7mm in height for enclosure layout.