Honeywell Toggle Switch, Bushing Mount, Latching, DPDT, Screw Terminal, 28 V dc, 125 V ac

RS-stocknr.:: 212-5204
Fabrikantnummer:: 2TL1-1N
Fabrikant:: Honeywell

Honeywell Toggle Switch, Bushing Mount, Latching, DPDT, Screw Terminal, 28 V dc, 125 V ac

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 149,44

(excl. BTW)

€ 180,82

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

59 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 149,44
5 - 9	€ 141,99
10 +	€ 134,80

*prijsindicatie

RS-stocknr.:: 212-5204
Fabrikantnummer:: 2TL1-1N
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Toggle Switch
	Contact Configuration	DPDT
	Switch Operation	Latching
	Switch Contact Current	20A
	Mount Type	Bushing
	Terminal Type	Screw
	Illuminated	No
	Minimum Operating Temperature	71°C
	Contact AC Voltage	125V ac
	Actuator Length	26.67mm
	Contact DC Voltage	28V dc
	Switch Configuration	On-Off-On
	Maximum Operating Temperature	-65°C
	Series	TL
	Length	30mm
	Width	33.5mm
	Standards/Approvals	UL, CE, CSA
	Height	26.7mm

	Alles selecteren
	Merk Honeywell
	Product Type Toggle Switch
	Contact Configuration DPDT
	Switch Operation Latching
	Switch Contact Current 20A
	Mount Type Bushing
	Terminal Type Screw
	Illuminated No
	Minimum Operating Temperature 71°C
	Contact AC Voltage 125V ac
	Actuator Length 26.67mm
	Contact DC Voltage 28V dc
	Switch Configuration On-Off-On
	Maximum Operating Temperature -65°C
	Series TL
	Length 30mm
	Width 33.5mm
	Standards/Approvals UL, CE, CSA
	Height 26.7mm

Datasheet - 2TL1-1N

N.v.t.

Honeywell Series TL Toggle Switch, 20A Contact Current, DPDT Contact Configuration - 2TL1-1N

This toggle switch provides a manually operated, latching three-position control for electrical circuits in industrial and commercial environments. It is designed for panel mounting using a bushing and delivers dual-pole switching with an On‑Off‑On arrangement, making it suitable for selecting between two live circuits or isolating a load.

Features and Benefits:

• DPDT contact arrangement enabling independent dual-circuit control
• 20A contact rating supporting high-current switching demands
• 125V AC and 28V DC ratings for mixed-voltage systems
• Screw terminals for robust, field-serviceable wiring connections
• Latching operation preventing unintended state changes

Applications

• Suitable for motor direction selection in automation panels
• Ideal for switching between redundant power sources in control racks
• Used for manual selection of signal paths in test equipment
• Can be used for controlling heaters or pumps in process systems

What mounting method is required for installation?

It fits a bushing-mount panel cut-out and secures from the front using the bushing hardware supplied by typical panel accessory kits.

How does the switch perform in low-temperature locations?

It remains operational down to -65°C, maintaining mechanical latching and contact continuity under cold conditions.

What protection approvals does it carry for industrial use?

The device meets recognised safety approvals commonly required for industrial components, enabling use where such standards are specified.

How is the actuator accessed for operator use?

The actuator projects through the panel and provides a tactile latching action with clearly defined On and Off positions.

What termination method is available for field wiring?

Termination is via screw-type terminals designed for secure conductor attachment and straightforward maintenance.