Honeywell Toggle Switch, Bushing Mount, On-On, DPDT, Screw Terminal, 28 V dc, 277 V ac

RS-stocknr.:: 842-4754
Artikelnummer Distrelec:: 303-45-271
Fabrikantnummer:: 2TL1-3G
Fabrikant:: Honeywell

Honeywell Toggle Switch, Bushing Mount, On-On, DPDT, Screw Terminal, 28 V dc, 277 V ac

Subtotaal (1 eenheid)*

€ 142,29

(excl. BTW)

€ 172,17

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 142,29

*prijsindicatie

RS-stocknr.:: 842-4754
Artikelnummer Distrelec:: 303-45-271
Fabrikantnummer:: 2TL1-3G
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Toggle Switch
	Contact Configuration	DPDT
	Switch Operation	On-On
	Switch Contact Current	20A
	Mount Type	Bushing
	Terminal Type	Screw
	Panel Cutout Size	12.4 mm
	Contact DC Voltage	28V dc
	Contact AC Voltage	277V ac
	Actuator Length	17mm
	Minimum Operating Temperature	-65°C
	Maximum Operating Temperature	71°C
	Switch Configuration	On-On
	Series	TL
	Width	33.5mm
	Length	22mm
	Height	26.7mm
	Standards/Approvals	UL, CE, CSA

	Alles selecteren
	Merk Honeywell
	Product Type Toggle Switch
	Contact Configuration DPDT
	Switch Operation On-On
	Switch Contact Current 20A
	Mount Type Bushing
	Terminal Type Screw
	Panel Cutout Size 12.4 mm
	Contact DC Voltage 28V dc
	Contact AC Voltage 277V ac
	Actuator Length 17mm
	Minimum Operating Temperature -65°C
	Maximum Operating Temperature 71°C
	Switch Configuration On-On
	Series TL
	Width 33.5mm
	Length 22mm
	Height 26.7mm
	Standards/Approvals UL, CE, CSA

Vrijgesteld

Land van herkomst:: US

Honeywell Series TL Toggle Switch, 20A Switch Contact Current, DPDT Contact Configuration - 2TL1-3G

This toggle switch provides a Compact manual switching solution for industrial and electronic control panels, enabling on-to-on circuit selection in dual-pole configurations. It is intended for panel installation with a threaded bushing and screw terminals, offering a practical Interface for operators in automation, electrical and mechanical settings.

Features and Benefits:

• DPDT contacts manage two independent circuits simultaneously
• Rated for 20A to support high-current switching demands
• Accepts up to 277V AC for mains-level applications
• Withstands 28V DC for demanding DC control circuits
• Operates reliably between -65 and 71 °C for harsh environments
• Screw terminals permit secure conductor connections under vibration

Applications

• Suitable for changeover of control circuits in industrial panels
• Ideal for isolating dual actuator supplies in machinery
• Used with motor control systems requiring manual selection
• Can be used for switching between redundant power feeds
• Suitable for retrofit kits in electrical maintenance tasks

What mounting method is required for installation?

The device mounts through a panel using a threaded bushing and requires a 12.4mm panel cutout for secure fitment.

How are conductors attached and secured?

Connections are MADE via screw-type terminals that allow tightened clamping of wires to maintain electrical contact.

What approvals does it carry for professional use?

It holds recognised safety approvals from UL, CE and CSA allowing use in equipment adhering to those standards.

What mechanical actuation size should operators expect?

The actuator projects 17mm to provide a reliable grip for manual switching operations.

Standards

UL recognized, CSA certified, CE approved