MHH Engineering Dial Measuring Torque Screwdriver, 0.01 To 0.5 Nm, 1/4 in Drive, ±6 % Accuracy
- RS-stocknr.:
- 469-6526
- Fabrikantnummer:
- 017400A23620
- Fabrikant:
- MHH Engineering
Subtotaal (1 eenheid)*
€ 312,42
(excl. BTW)
€ 378,03
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 312,42 |
*prijsindicatie
Kalibratie-opties
Per stuk
€ 385,42
(excl. BTW)
€ 466,36
(incl. BTW)
- RS-stocknr.:
- 469-6526
- Fabrikantnummer:
- 017400A23620
- Fabrikant:
- MHH Engineering
Datasheets
Wetgeving en compliance
Productomschrijving
Vrijgesteld
Dial Measuring Drivers
Stainless steel shafts, aluminium handles and glass filled nylon dials
Flat torsion spring mechanism gives best linear characteristics in both directions
Feature dual ISO / Imperial dials
¼" Female Hexagon Drive to suit screwdriver bits
Can be used in either track mode, where the pointer tracks the applied torque, or in memory mode, where the pointer remains at the maximum torque applied
Mode is easily changed by withdrawing slider and resetting the bezel ring
Suitable for Quality Control and Research and Development, also assembly operations for example electronics, electrical etc.
Note
These Drivers must be pre-set using a suitable Torque Analyser. See Analyser range for details.
Gerelateerde Links
- MHH Engineering Dial Measuring Hex Torque Screwdriver 1/4 in Drive, ±6 % Accuracy - With RS Calibration
- MHH Engineering Dial Measuring Hex Torque Screwdriver 1/4'' Drive, ±6 % Accuracy
- MHH Engineering Dial Measuring Hex Torque Screwdriver 1/4'' Drive, ±6 % Accuracy
- MHH Engineering Dial Measuring Hex Torque Screwdriver 1/4 in Drive, ±6 % Accuracy - With RS Calibration
- MHH Engineering Dial Measuring Hex Torque Screwdriver 1/4 in Drive, ±6 % Accuracy - With RS Calibration
- MHH Engineering Pre-Settable Hex Torque Screwdriver 1/4'' Drive, ±6 % Accuracy
- MHH Engineering Pre-Settable Hex Torque Screwdriver 1/4'' Drive, ±6 % Accuracy
- MHH Engineering Adjustable Hex Torque Screwdriver 1/4 in Drive, ±6 % Accuracy - With RS Calibration