WeEn Semiconductors Co., Ltd Through Hole, 3-pin, TRIAC, 600V, Gate Trigger 1.5V 600V

Bekijk alle TRIACs
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 5 eenheden)*

€ 3,42

(excl. BTW)

€ 4,14

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 10 stuk(s) vanaf 05 januari 2026
  • Plus verzending 350 stuk(s) vanaf 05 januari 2026
  • Plus verzending 855 stuk(s) vanaf 12 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
5 - 45€ 0,684€ 3,42
50 - 95€ 0,56€ 2,80
100 - 245€ 0,512€ 2,56
250 - 495€ 0,478€ 2,39
500 +€ 0,444€ 2,22

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
484-2779
Fabrikantnummer:
BT137-600D,127
Fabrikant:
WeEn Semiconductors Co., Ltd
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

WeEn Semiconductors Co., Ltd

Rated Average On-State Current

8A

Mounting Type

Through Hole

Package Type

TO-220AB

Maximum Gate Trigger Current

10mA

Repetitive Peak Reverse Voltage

600V

Surge Current Rating

71A

Pin Count

3

Maximum Gate Trigger Voltage

1.5V

Repetitive Peak Forward Blocking Voltage

600V

Maximum Holding Current

10mA

Dimensions

10.3 x 4.7 x 9.4mm

Length

10.3mm

Width

4.7mm

Height

9.4mm

Peak On-State Voltage

1.65V

Minimum Operating Temperature

-40 °C

Maximum Operating Temperature

+125 °C

Repetitive Peak Off-State Current

0.5mA

Land van herkomst:
CN

TRIAC, WeEn Semiconductors


The WeEn Semiconductors Planar passivated very sensitive gate four quadrant triac in a SOT78 plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate "series D" triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.

High blocking voltage capability
Direct triggering from low power drivers and logic ICs
Planar passivated for voltage ruggedness and reliability
Triggering in all four quadrants
Low holding current for low current loads and lowest EMI at commutation
Very sensitive gate


TRIACs


A range of TRIACs (Triodes for Alternating Current is also known as Bidirectional Thyristors). They are used in AC switching and control applications with current ratings from under 1A to 40A rms. A TRIAC makes a convenient switch for alternating current circuit.

Gerelateerde Links