Nexperia PCMF3USB3SZ 2-Element Uni-Directional ESD Protection Diode, 15-Pin WLCSP

Bulkkorting beschikbaar
Bekijk bulkkorting

Subtotaal (1 verpakking van 5 eenheden)*

€ 11,06

(excl. BTW)

€ 13,385

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 14 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks
Per stuk
Per verpakking*
5 - 45€ 2,212€ 11,06
50 - 495€ 1,864€ 9,32
500 - 2495€ 1,512€ 7,56
2500 - 3745€ 1,454€ 7,27
3750 +€ 1,448€ 7,24

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
153-1916
Fabrikantnummer:
PCMF3USB3SZ
Fabrikant:
Nexperia
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Nexperia

Diode Configuration

Complex Array

Product Type

ESD Protection Diode

Direction Type

Uni-Directional

Minimum Breakdown Voltage Vbr

4.5V

Mount Type

Surface

Package Type

WLCSP

Maximum Reverse Stand-off Voltage Vwm

5V

Pin Count

15

Clamping Voltage VC

6.5V

Maximum Peak Pulse Current Ippm

4A

ESD Protection

Yes

Minimum Operating Temperature

-40°C

Test Current It

50mA

Maximum Operating Temperature

85°C

Number of Elements per Chip

2

Width

1.22mm

Length

2.42mm

Height

0.38mm

Maximum Reverse Leakage Current

100nA

Common Mode filter for USB ports, No room for compromise, The most common Camera and display Interface used now for portable devices is the differential MIPI Interface running at RF frequencies. To allow operation at typical GSM/3G/LTE frequencies, a strong common-mode suppression over all bands and higher harmonics is needed. At the same time, a wide differential passband is needed to keep signal integrity. Since ESD can enter through gaps in the portable device, strong ESD protection is needed to avoid damage of the electronics or re-setting the system due to ESD strikes

Strong common-mode suppression > 14 dB in the range between 500 MHz and > 8 GHz

Wide passband > 2 GHz, ensuring signal integrity for all MIPI frequencies

ESD ruggedness > 15 kV contact, far exceeding IEC 61000-4-2 (8 kV contact)

Deep snap-back for optimized SoC protection against ESD strikes

Very thin package (0.5 mm max package height)

All LVDS signals needing a passband up to 2 GHz

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.