Infineon ESD150B1W0201E6327XTSA1 Bi-Directional ESD Protection Diode, 12 W, 2-Pin WLL-2

RS-stocknr.:: 258-0815
Fabrikantnummer:: ESD150B1W0201E6327XTSA1
Fabrikant:: Infineon

Infineon ESD150B1W0201E6327XTSA1 Bi-Directional ESD Protection Diode, 12 W, 2-Pin WLL-2

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 20 eenheden)*

€ 2,24

(excl. BTW)

€ 2,72

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

8.160 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
20 - 180	€ 0,112	€ 2,24
200 - 480	€ 0,106	€ 2,12
500 - 980	€ 0,061	€ 1,22
1000 - 1980	€ 0,056	€ 1,12
2000 +	€ 0,051	€ 1,02

*prijsindicatie

RS-stocknr.:: 258-0815
Fabrikantnummer:: ESD150B1W0201E6327XTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Product Type	ESD Protection Diode
	Direction Type	Bi-Directional
	Diode Configuration	Single Bi-Directional
	Minimum Breakdown Voltage Vbr	5.9V
	Mount Type	PCB
	Package Type	WLL-2
	Maximum Reverse Stand-off Voltage Vwm	3.3V
	Pin Count	2
	Peak Pulse Power Dissipation Pppm	12W
	Clamping Voltage VC	5.4V
	Minimum Operating Temperature	-55°C
	Test Current It	1mA
	Maximum Peak Pulse Current Ippm	3A
	ESD Protection	Yes
	Maximum Operating Temperature	125°C
	Standards/Approvals	IEC61000-4-4, IEC61000-4-5, IEC61000-4-2
	Series	ESD150-B1-W0201
	Automotive Standard	No
	Maximum Reverse Leakage Current	10nA

	Alles selecteren
	Merk Infineon
	Product Type ESD Protection Diode
	Direction Type Bi-Directional
	Diode Configuration Single Bi-Directional
	Minimum Breakdown Voltage Vbr 5.9V
	Mount Type PCB
	Package Type WLL-2
	Maximum Reverse Stand-off Voltage Vwm 3.3V
	Pin Count 2
	Peak Pulse Power Dissipation Pppm 12W
	Clamping Voltage VC 5.4V
	Minimum Operating Temperature -55°C
	Test Current It 1mA
	Maximum Peak Pulse Current Ippm 3A
	ESD Protection Yes
	Maximum Operating Temperature 125°C
	Standards/Approvals IEC61000-4-4, IEC61000-4-5, IEC61000-4-2
	Series ESD150-B1-W0201
	Automotive Standard No
	Maximum Reverse Leakage Current 10nA

Datasheet - ESD150B1W0201E6327XTSA1

Infineon ESD150-B1-W0201 Series ESD Protection Diode, 3.3V Maximum Reverse Stand-Off Voltage, 5.4V Clamping Voltage - ESD150B1W0201E6327XTSA1

This ESD protection diode is a bidirectional transient voltage suppression device designed for PCB mounting to protect sensitive circuitry from electrostatic discharge and surge events. It operates across a wide ambient range and is intended for applications where controlled clamping and low leakage are required. The component meets multiple IEC immunity standards and is supplied in an SMT WLL-2 package for Compact board-level protection.

Features and Benefits:

• 3.3V Maximum Reverse Stand-off Voltage provides defined standoff protection
• 5.4V Clamping Voltage limits transient peaks to protect downstream components
• 3A Peak Pulse Current handles short surge events without failure
• 12W Peak Pulse Power Dissipation absorbs high-energy pulses during tests
• 10nA Maximum Reverse Leakage Current minimises quiescent drain on lines

Applications

• Suitable for protecting I/O lines against ESD events on PCBs
• Ideal for safeguarding interfaces in communications equipment
• Used with sensitive sensors needing low-leakage protection
• Can be used for transient suppression on power-distribution lines
• Suitable for designs requiring IEC 61000-4-2 compliance verification

What directional behaviour does the device provide?

It functions as a bi-directional clamping diode allowing symmetrical protection for signals that can swing positive or negative.

What are the permitted operating temperature limits?

The component is rated to operate down to -55°C and up to 125°C.

How is Pulse performance specified for surge events?

Peak Pulse power absorption is 12W with a Peak Pulse current capability of 3A under specified test conditions.

Which standards were used to validate its immunity performance?

It has been assessed against IEC 61000-4-4, IEC 61000-4-5 and IEC 61000-4-2.