Belden 7704NH Series Twisted Pair Cable, 2 Pairs, 22 AWG, 500 m, White Sheath Low Smoke Zero Halogen

RS-stocknr.:: 631-624
Fabrikantnummer:: 7704NH.00500
Fabrikant:: Belden

Belden 7704NH Series Twisted Pair Cable, 2 Pairs, 22 AWG, 500 m, White Sheath Low Smoke Zero Halogen

Subtotaal (1 rol van 500 meter)*

€ 1.557,97

(excl. BTW)

€ 1.885,14

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 08 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Rol(len)	Per rol	Per meter*
1 +	€ 1.557,97	€ 3,116

*prijsindicatie

RS-stocknr.:: 631-624
Fabrikantnummer:: 7704NH.00500
Fabrikant:: Belden

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Belden
	Number of Pairs	2
	Product Type	Twisted Pair Cable
	Cross Sectional Area	22 AWG
	Cable Length	500m
	Jacket Colour	White
	Outside Diameter	6.5mm
	Conductor Type	Solid
	Minimum Operating Temperature	-15°C
	Jacket Material	Low Smoke Zero Halogen
	Maximum Operating Temperature	80°C
	Standards/Approvals	CE, EU, UKCA
	Fire Behaviour	IEC 60332-1-2, IEC 60332-3-24
	Conductor Material	Bare Copper
	Series	7704NH
	Voltage	300V

	Alles selecteren
	Merk Belden
	Number of Pairs 2
	Product Type Twisted Pair Cable
	Cross Sectional Area 22 AWG
	Cable Length 500m
	Jacket Colour White
	Outside Diameter 6.5mm
	Conductor Type Solid
	Minimum Operating Temperature -15°C
	Jacket Material Low Smoke Zero Halogen
	Maximum Operating Temperature 80°C
	Standards/Approvals CE, EU, UKCA
	Fire Behaviour IEC 60332-1-2, IEC 60332-3-24
	Conductor Material Bare Copper
	Series 7704NH
	Voltage 300V

Datasheet - 7704NH.00500

Land van herkomst:: NL

Belden 7704NH Series Twisted & Multipair Industrial Cable, 500m Cable Length, 22AWG Cross Sectional Area - 7704NH.00500

This twisted & multipair industrial cable is designed for signal and control wiring in industrial environments. It combines a two-pair twisted configuration with solid bare copper conductors and a low-smoke zero-halogen outer sheath to maintain circuit integrity and reduce hazardous emissions during fire conditions. The cable is suitable for fixed installation where moderate temperature ranges and a 300V rating are required.

Features and Benefits:

• Solid bare copper conductors enabling consistent conductivity
• 22AWG cross section supporting Compact routing and terminations
• LSZH jacket reducing toxic gases and dense smoke
• Rated for continuous operation up to 80°C
• Withstands storage and use down to -15°C
• Meets IEC 60332-1-2 and IEC 60332-3-24 fire performance

Applications

• Suitable for industrial automation control loops
• Ideal for panel wiring in electrical enclosures
• Used for signal transmission in machinery installations
• Can be used for connections within instrumentation racks

How is the cable constructed internally?

It contains two individually twisted pairs of solid bare copper conductors with a polymeric LSZH outer sheath designed to limit halogen emissions.

What voltage can the cable safely carry?

The insulation system and conductor construction are specified for a maximum working voltage of 300V.

How does the cable behave in fire scenarios?

The sheath and materials conform to IEC 60332-1-2 and IEC 60332-3-24, indicating limited flame propagation and reduced smoke/halogen output under specified test conditions.

What physical size should be considered when planning installations?

The cable has an outside diameter of 6.5mm suitable for tight bundle routing and tray-filling calculations.

In what formats is the cable supplied?

It is provided on 500m lengths allowing longer continuous runs without intermediate joins.