FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 56-Pin QFN
- RS-stocknr.:
- 146-6835
- Artikelnummer Distrelec:
- 303-96-567
- Fabrikantnummer:
- FT600Q-B-T
- Fabrikant:
- FTDI Chip
Subtotaal (1 tray van 260 eenheden)*
€ 1.908,92
(excl. BTW)
€ 2.309,84
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 520 stuk(s) vanaf 09 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per tray* |
|---|---|---|
| 260 + | € 7,342 | € 1.908,92 |
*prijsindicatie
- RS-stocknr.:
- 146-6835
- Artikelnummer Distrelec:
- 303-96-567
- Fabrikantnummer:
- FT600Q-B-T
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Number of Transceivers | 2 | |
| Product Type | USB Bridge IC | |
| Maximum Data Rate | 5Gbps | |
| Sub Type | Transceiver | |
| USB Specification | USB 2.0, USB 3.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 3.6V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 56 | |
| Supported Protocols | USB 3.0, USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | FT600Q | |
| Length | 7.1mm | |
| Standards/Approvals | RoHS | |
| Width | 7.1 mm | |
| Height | 0.69mm | |
| Supply Current | 70mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Number of Transceivers 2 | ||
Product Type USB Bridge IC | ||
Maximum Data Rate 5Gbps | ||
Sub Type Transceiver | ||
USB Specification USB 2.0, USB 3.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 3.6V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 56 | ||
Supported Protocols USB 3.0, USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series FT600Q | ||
Length 7.1mm | ||
Standards/Approvals RoHS | ||
Width 7.1 mm | ||
Height 0.69mm | ||
Supply Current 70mA | ||
Automotive Standard No | ||
Enabling Faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Gerelateerde Links
- FTDI Chip FT600Q-B-T 2-Channel 5 Gbps USB 3.0 3.3 V, 56-Pin QFN
- FTDI Chip 2-Channel 5 Gbps USB 3.0 3.3 V, 76-Pin QFN
- FTDI Chip FT601Q-B-T 2-Channel 5 Gbps USB 3.0 3.3 V, 76-Pin QFN
- FTDI Chip 1-Channel 480 Mbps USB 76-Pin QFN
- FTDI Chip 1-Channel 12 Mbps USB 2.0 56-Pin QFN
- FTDI Chip FT602Q-B-T 1-Channel 480 Mbps USB 76-Pin QFN
- FTDI Chip FT232HPQ-TRAY 1-Channel 12 Mbps USB 2.0 56-Pin QFN
- FTDI Chip FTDI USB-KEY