FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6V, USB 3.0, USB 2.0, 3.3 V, 56-Pin QFN
- RS-stocknr.:
- 146-6838P
- Fabrikantnummer:
- FT600Q-B-T
- Fabrikant:
- FTDI Chip
Ontvang bulkkorting
Voeg 25 meer toe om € 4,75 te besparen
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd op een tray)*
€ 70,80
(excl. BTW)
€ 85,70
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 432 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 10 - 24 | € 7,08 | - |
| 25 - 49 | € 6,89 | € 4,75 |
| 50 - 99 | € 6,70 | € 19,00 |
| 100 + | € 6,53 | € 55,00 |
*prijsindicatie
- RS-stocknr.:
- 146-6838P
- Fabrikantnummer:
- FT600Q-B-T
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Maximum Data Rate | 5Gbps | |
| Product Type | USB Bridge IC | |
| Number of Transceivers | 2 | |
| Sub Type | Transceiver | |
| USB Specification | USB 2.0, USB 3.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 3.6V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 56 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB 3.0, USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Series | FT600Q | |
| Length | 7.1mm | |
| Height | 690μm | |
| Supply Current | 70mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Maximum Data Rate 5Gbps | ||
Product Type USB Bridge IC | ||
Number of Transceivers 2 | ||
Sub Type Transceiver | ||
USB Specification USB 2.0, USB 3.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 3.6V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 56 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB 3.0, USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Series FT600Q | ||
Length 7.1mm | ||
Height 690μm | ||
Supply Current 70mA | ||
Automotive Standard No | ||
Enabling Faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.