Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, 3.3 V, UTMI + ULPI, OTG, USB 2.0, 3.3 V, 32-Pin QFN

Bekijk alle USB Interface ICs

Subtotaal (1 verpakking van 10 eenheden)*

€ 13,06

(excl. BTW)

€ 15,80

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 3.470 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
10 +€ 1,306€ 13,06

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
177-9859
Fabrikantnummer:
USB3300-EZK-TR
Fabrikant:
Microchip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Microchip

Number of Transceivers

3

Product Type

USB Transceiver

USB Specification

USB 2.0

Sub Type

Transceiver

Power Supply Type

Single

ESD Protection

Yes

Minimum Supply Voltage

3.3V

Maximum Supply Voltage

3.3V

Mount Type

Surface

Package Type

QFN

Pin Count

32

Supported Protocols

UTMI + ULPI, OTG, USB 2.0

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Height

0.95mm

Standards/Approvals

No

Length

5.1mm

Series

USB3300

Width

5.1 mm

Automotive Standard

No

Land van herkomst:
TW
The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.

USB-IF Hi-Speed

Latch-Up performance exceeds 150 mA

ESD protection levels of ±8kV HBM without external protection devices

Includes full support for the optional On-The-Go (OTG) protocol

Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)

Allows host to turn VBUS off to conserve battery power in OTG applications

Internal 1.8 volt regulators allow operation from a single 3.3 volt supply

Gerelateerde Links