STMicroelectronics TCPP02-M18, USB Controller, 5.5 V, USB Type C, 2.7 V, 18-Pin QFN-18

Bekijk alle USB Interface ICs
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 5 eenheden)*

€ 6,30

(excl. BTW)

€ 7,60

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 5.960 stuk(s) vanaf 26 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
5 - 5€ 1,26€ 6,30
10 - 95€ 1,238€ 6,19
100 - 245€ 1,208€ 6,04
250 - 495€ 1,186€ 5,93
500 +€ 1,162€ 5,81

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
234-8903
Fabrikantnummer:
TCPP02-M18
Fabrikant:
STMicroelectronics
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

STMicroelectronics

Product Type

USB Controller

USB Specification

USB Type C

Sub Type

USB Interface

ESD Protection

Yes

Maximum Supply Voltage

5.5V

Minimum Supply Voltage

2.7V

Mount Type

Surface

Package Type

QFN-18

Pin Count

18

Minimum Operating Temperature

-40°C

Supported Protocols

USB Type C

Maximum Operating Temperature

125°C

Series

TCPP02-M18

Standards/Approvals

No

Length

3.5mm

Height

0.6mm

Width

3.5 mm

Supply Current

2.7mA

Automotive Standard

No

The STMicroelectronics USB type-C protection for source application is a MCU companion chip enabling cost-effective USB-C source solution. It provides protections and functionalities to safely comply with the USB-C specification. It features 24 V tolerant ESD protection as per IEC61000-4-2 level 4 on USB type-C connector communication channel pins (CC). Also, it provides overvoltage protection on CC1 and CC2 pins when these pins are subjected to short circuit with the VBUS pin that may happen when removing the USB type-C cable from its receptacle.

Externally programmable VBUS over current protection (OCP)

Integrated charge pump and gate driver for external N-channel MOSFET

VBUS current sense and amplifier with analog output

Integrated discharge on VBUS and VCONN

Over temperature protection

Over voltage protection (OVP) on CC lines against short-to-VBUS

VCONN OCP (100 mW max), OVP (6 V max)

ESD protection for CC1, CC2, compliant with IEC 61000-4-2 Level 4 (±8 kV contact discharge, ±15 kV Air discharge)

Compliant with PPS (programmable power supply)

I2C communication, with two I2C addresses available

Junction temperature from -40 °C to 125 °C

Compliant with USB-C power delivery standard 3.1, standard power range (SPR), up to 100 W

ECOPACK2 compliant

Gerelateerde Links