FTDI Chip, USB to Serial UART, 1-Channel 3 Mbps, 5V, USB to UART, 1.8 V, 28-Pin SSOP
- RS-stocknr.:
- 275-0036P
- Fabrikantnummer:
- FT232RNL-REEL
- Fabrikant:
- FTDI Chip
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd op een doorlopende strip)*
€ 42,70
(excl. BTW)
€ 51,70
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 1.006 stuk(s) vanaf 09 februari 2027
- Plus verzending 3.721 stuk(s) vanaf 16 maart 2027
- Plus verzending 32.000 stuk(s) vanaf 19 juli 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 49 | € 4,27 |
| 50 - 99 | € 4,13 |
| 100 - 1999 | € 3,89 |
| 2000 + | € 2,64 |
*prijsindicatie
- RS-stocknr.:
- 275-0036P
- Fabrikantnummer:
- FT232RNL-REEL
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Product Type | USB to Serial UART | |
| Number of Transceivers | 1 | |
| Maximum Data Rate | 3Mbps | |
| USB Specification | USB 2.0 | |
| Sub Type | USB Controller | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5V | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB to UART | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Series | FT232RNL | |
| Automotive Standard | No | |
| Supply Current | 7mA | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Product Type USB to Serial UART | ||
Number of Transceivers 1 | ||
Maximum Data Rate 3Mbps | ||
USB Specification USB 2.0 | ||
Sub Type USB Controller | ||
Power Supply Type Single | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5V | ||
Package Type SSOP | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB to UART | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Series FT232RNL | ||
Automotive Standard No | ||
Supply Current 7mA | ||
The FTDI Chip USB UART IC is a USB to serial UART interface device which simplifies USB to serial designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available.
AVCC filtering
RoHS compliant
POR and LDO regulator
Supports synchronous bit bang mode
New FTDI Chip ID security dongle feature
Signal inversion and drive strength selection
