SKF Wrapped V-Belt, belt section C 1860 mm, 1803 mm Length
- RS-stocknr.:
- 585-575
- Fabrikantnummer:
- PHG C71
- Fabrikant:
- SKF
Subtotaal (5 eenheden, in een pakket van 5)*
€ 99,40
(excl. BTW)
€ 120,27
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 02 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Verpakking(en) | Per verpakking | Per stuk* |
|---|---|---|
| 1 + | € 99,40 | € 19,88 |
*prijsindicatie
- RS-stocknr.:
- 585-575
- Fabrikantnummer:
- PHG C71
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Belt Section | C | |
| Product Type | Wrapped V-Belt | |
| Series | PHG | |
| Cord Material | Polyester | |
| Belt Material | Chloroprene Rubber (Polychloroprene) | |
| Belt Height | 14mm | |
| Outside Length | 1860mm | |
| Belt Width | 22mm | |
| Standards/Approvals | No | |
| Inside Length | 1803mm | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Belt Section C | ||
Product Type Wrapped V-Belt | ||
Series PHG | ||
Cord Material Polyester | ||
Belt Material Chloroprene Rubber (Polychloroprene) | ||
Belt Height 14mm | ||
Outside Length 1860mm | ||
Belt Width 22mm | ||
Standards/Approvals No | ||
Inside Length 1803mm | ||
- Land van herkomst:
- CN
The SKF Wrapped classical V-belt provides a very efficient and cost-effective method for transmitting power from prime movers to driven machines. Classical V-belt has pre-tensioned polyester cords that provide low stretch during operation and a fibre-loaded rubber cushion that gives good transverse rigidity. Being fully wrapped in a heavy duty industrial fabric, the belts have a high resistance against abrasion.
High flexibility
Low elongation during operation
Oil and heat resistant
With anti-static properties
Fully wrapped to resist abrasion
Reduced energy consumption and increased mean time between failures