SMC for use with ZK2 Series Vacuum Ejectors Vacuum Generator

This vacuum generator is a Compact pneumatic unit designed to produce and control vacuum for industrial automation tasks. It integrates a two-stage ejector with pilot-operated valves and an analogue pressure sensor output to manage suction performance and monitoring in manufacturing and handling systems.

• Maximum vacuum capability of -91 kPa for deep suction applications
• Air consumption 58 l/min supporting continuous operation
• Supply pressure range 0.3 to 0.6 MPa enabling stable performance
• Output voltage 1 to 5V for straightforward analogue monitoring
• Noise level 75 dB to assist acoustic planning on the line
• Repeatability ±0.2% F.S. for consistent pick-and-place cycles

• Suitable for pick-and-place end-of-arm tooling in electronics assembly
• Ideal for vacuum-assisted component transfer in automation cells
• Used with pneumatic systems requiring remote vacuum sensing
• Can be used for packaging suction cups in high-throughput lines
• Suitable for integration into machine modules requiring Compact vacuum sources

The unit accepts 12 to 24VDC ±10% with ripple up to 10% and draws 15 mA or less for the sensor Plus 0.4 W for valve power.

Pressure is provided as an analogue 1 to 5V output with approximately 1 kΩ source impedance, corresponding to 0 to -101 kPa sensing range.

It operates between 0 and 50 °C, the sensor can be stored at −20 to 70 °C, and humidity limits are 35 to 85% RH with no condensation.

The case is PBT resin