SICK Pressure Switch 0 bar to 10 bar

Bekijk alle Vacuum Switches

Subtotaal (1 eenheid)*

€ 154,53

(excl. BTW)

€ 186,98

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 +€ 154,53

*prijsindicatie

RS-stocknr.:
100-0679
Fabrikantnummer:
PAC50-DGD / 1062986
Fabrikant:
SICK
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SICK

Product Type

Pressure Switch

Minimum Operating Pressure

0bar

Switch Output

PNP, NPN, Push Pull

Suitable Medias

Air

Pressure Type

Positive Pressure

Mount Type

DIN Rail

Voltage

30V dc

Series

PAC50

Maximum Operating Pressure

10 bar

Connection Thread Standard

G, Metric

Minimum Operating Temperature

0°C

Port Gender

Female

Maximum Operating Temperature

60°C

Width

35mm

Standards/Approvals

IEC/EN

Depth

35mm

Height

63mm

IP Rating

IP67, IP65

Hazardous Area Certification

No

LED Indicator

Yes

Land van herkomst:
TH

PAC50 Pressure Switches


The SICK PAC50 pressure switch provides an easy to read overview of important system information using a clear bi colour display. Simple to programme making commissioning fast and easy, the PAC50 provides up to 2 switch outputs and an extra analogue output in a rugged casing.

Switched outputs can be programmed to be NPN, PNP or push-pull. Analogue inputs automatically detect whether a voltage or current signal is required simplifying installation and reducing stocking cost.

Features and Benefits


Integrated pressure switch, transmitter and display

Clear simultaneous display of applied pressure and set points

Colour change when set points are reached

3 large push buttons

DIN rail or panel mounting (via accessory)

Standard M12 electrical connection

PIF connection or 2 x G1/4” female (1 on rear, 1 on bottom)

Switch outputs configurable PNP, NPN, Push-pull. IO Link V1.1.

Analogue outputs configurable 4-20mA / 0-10V

Pressure ranges available -1 to 0 Bar, -1 to +1 Bar, 0 to 6 Bar, 0-10 Bar

Set-up and Installation


Installation and set-up of the PAC50 is fast and easy with no tools required for programming. Mounting is done using the integrated DIN Rail Mounting on the back or with the panel and wall mounting kit available separately (1000682).

Set-up and commissioning are done by using the three buttons on the front panel. Use the arrow keys to navigate the menu and the middle key to select the required parameter. Then simply use the arrow keys and adjust to the required set point before saving by using the middle key. Your PAC50 is now ready for operation.

Applications


The PAC50 is suitable for use with both positive pressure and vacuum systems in a range of applications including pneumatic control systems, vacuum grippers and cylinder pressure regulation.

Gerelateerde Links