onsemi 8-Pin 7.3 V 9.4 V
- RS-stocknr.:
- 161-2610
- Fabrikantnummer:
- NCP4305DDR2G
- Fabrikant:
- onsemi
Subtotaal (1 rol van 2500 eenheden)*
€ 1.415,00
(excl. BTW)
€ 1.712,50
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 29 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 0,566 | € 1.415,00 |
*prijsindicatie
- RS-stocknr.:
- 161-2610
- Fabrikantnummer:
- NCP4305DDR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Voltage Controller | |
| Number of Channels | 1 | |
| Mount Type | Surface | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 7.3V | |
| Maximum Supply Voltage | 9.4V | |
| Height | 1.75mm | |
| Width | 6.2 mm | |
| Series | NCP4305 | |
| Standards/Approvals | RoHS | |
| Length | 5mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Voltage Controller | ||
Number of Channels 1 | ||
Mount Type Surface | ||
Pin Count 8 | ||
Minimum Supply Voltage 7.3V | ||
Maximum Supply Voltage 9.4V | ||
Height 1.75mm | ||
Width 6.2 mm | ||
Series NCP4305 | ||
Standards/Approvals RoHS | ||
Length 5mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The NCP4305 is high performance driver tailored to control a synchronous rectification MOSFET in switch mode power supplies. Thanks to its high performance drivers and versatility, it can be used in various topologies such as DCM or CCM flyback, quasi resonant flyback, forward and half bridge resonant LLC. The combination of externally adjustable minimum off-time and on-time blanking periods helps to fight the ringing induced by the PCB layout and other parasitic elements. A reliable and noise less operation of the SR system is insured due to the Self Synchronization feature.
Precise True Secondary Zero Current Detection with Adjustable Threshold
Typically 20 ns Turn off Delay from Current Sense Input to Driver
Zero Current Detection Pin Capability
Adjustable Minimum ON Time and Minimum OFF Time
Self Synchronization
Light Load Detection with Modulated Gate Drive
Improves performance for applications working in deep CCM
Enters the IC into a low consumption standby mode