onsemi NIS5232MN1TXG 10-Pin 9 V 18 V
- RS-stocknr.:
- 161-2647
- Fabrikantnummer:
- NIS5232MN1TXG
- Fabrikant:
- onsemi
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 161-2647
- Fabrikantnummer:
- NIS5232MN1TXG
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Voltage Controller | |
| Number of Channels | 1 | |
| Mount Type | Surface | |
| Pin Count | 10 | |
| Minimum Supply Voltage | 9V | |
| Maximum Supply Voltage | 18V | |
| Series | NIS5232 | |
| Width | 3 mm | |
| Length | 3mm | |
| Height | 0.9mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Maximum Operating Temperature | 150°C | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Voltage Controller | ||
Number of Channels 1 | ||
Mount Type Surface | ||
Pin Count 10 | ||
Minimum Supply Voltage 9V | ||
Maximum Supply Voltage 18V | ||
Series NIS5232 | ||
Width 3 mm | ||
Length 3mm | ||
Height 0.9mm | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Maximum Operating Temperature 150°C | ||
The NIS5232 is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. It is designed to buffer the load device from excessive input voltage which can damage sensitive circuits. It also includes an Over voltage clamp circuit that limits the output voltage during transients but does not shut the unit down, thereby allowing the load circuit to continue operation. Two thermal options are available, latching and auto-retry.
Integrated Power Device
Power Device Thermally Protected
No External Current Shunt Required
9 V to 18 V Input Range
44 m Typical
Internal Charge Pump
Internal Under voltage Lockout Circuit
Internal Overvoltage Clamp
ESD Ratings: Human Body Model (HBM), 1500 VMachine Model (MM), 200 V
These Devices are PbFree and are RoHS Compliant
Applications
Mother Board Power Management