ROHM BU33SA4WGWL-E2, LDO Regulator, 200mA, 3.3 V, ±0.6% 4-Pin, UCSP50L1
- RS-stocknr.:
- 171-7535
- Fabrikantnummer:
- BU33SA4WGWL-E2
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 50 eenheden)*
€ 15,50
(excl. BTW)
€ 19,00
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 50 - 450 | € 0,31 | € 15,50 |
| 500 - 700 | € 0,19 | € 9,50 |
| 750 - 1450 | € 0,18 | € 9,00 |
| 1500 - 2450 | € 0,167 | € 8,35 |
| 2500 + | € 0,163 | € 8,15 |
*prijsindicatie
- RS-stocknr.:
- 171-7535
- Fabrikantnummer:
- BU33SA4WGWL-E2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Maximum Output Current | 200mA | |
| Number of Outputs | 1 | |
| Output Voltage | 3.3 V | |
| Line Regulation | 8 mV | |
| Accuracy | ±0.6% | |
| Load Regulation | 16 mV | |
| Polarity | Positive | |
| Mounting Type | Surface Mount | |
| Package Type | UCSP50L1 | |
| Pin Count | 4 | |
| Output Type | Fixed | |
| Dimensions | 0.8 x 0.8 x 0.45mm | |
| Height | 0.45mm | |
| Maximum Input Voltage | 5.5 V | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Input Voltage | 1.7 V | |
| Minimum Operating Temperature | -40 °C | |
| Width | 0.8mm | |
| Length | 0.8mm | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Maximum Output Current 200mA | ||
Number of Outputs 1 | ||
Output Voltage 3.3 V | ||
Line Regulation 8 mV | ||
Accuracy ±0.6% | ||
Load Regulation 16 mV | ||
Polarity Positive | ||
Mounting Type Surface Mount | ||
Package Type UCSP50L1 | ||
Pin Count 4 | ||
Output Type Fixed | ||
Dimensions 0.8 x 0.8 x 0.45mm | ||
Height 0.45mm | ||
Maximum Input Voltage 5.5 V | ||
Maximum Operating Temperature +85 °C | ||
Minimum Input Voltage 1.7 V | ||
Minimum Operating Temperature -40 °C | ||
Width 0.8mm | ||
Length 0.8mm | ||
BUxxSA4 series are high-performance CMOS LDO regulators with output current ability of up to 200-mA. These devices have excellent noise and load response characteristics despite of its low circuit current consumption of 40μA. They are most appropriate for various applications such as power supplies for logic IC, RF, and camera modules.
High Output Voltage Accuracy: ±0.6% (±15mV on VOUT<2.5V)
High Ripple Rejection: 70 dB (Typ, 1 kHz,)
Compatible with small ceramic capacitor (Cin=Cout=0.47 μF)
Low Current Consumption: 40 μA
Output Voltage ON/OFF control
Built-in Over Current Protection Circuit (OCP)
Built-in Thermal Shutdown Circuit (TSD)
Adopting ultra-small WLCSP UCSP50L1
High Ripple Rejection: 70 dB (Typ, 1 kHz,)
Compatible with small ceramic capacitor (Cin=Cout=0.47 μF)
Low Current Consumption: 40 μA
Output Voltage ON/OFF control
Built-in Over Current Protection Circuit (OCP)
Built-in Thermal Shutdown Circuit (TSD)
Adopting ultra-small WLCSP UCSP50L1
Gerelateerde Links
- ROHM BU28SA4WGWL-E2 200mA ±0.6% 4-Pin, UCSP50L1
- ROHM BU18SA4WGWL-E2 200mA ±0.6% 4-Pin, UCSP50L1
- BD5291GWL-E2 ROHM 3.2 MHz, 5-Pin 5.5 V UCSP50L1
- ROHM BD50GC0WEFJ-E2 1A ±1% 8-Pin, HTSOP-J8
- ROHM BU15TA2WNVX-TR 200mA ±1% 4-Pin, SSON
- ROHM BU30SD2MG-MTR 200mA ±2% 5-Pin, SSOP
- ROHM BU28SD2MG-MTR 200mA ±2% 5-Pin, SSOP
- ROHM BU11JA2MNVX-CTL 200mA ±2% 4-Pin, SSON
