STMicroelectronics 1 Voltage Supervisor 4-Pin 2.63 V SOT-143-4, STM6315RDW13F
- RS-stocknr.:
- 151-535P
- Fabrikantnummer:
- STM6315RDW13F
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Subtotaal 200 eenheden (geleverd op een rol)*
€ 59,00
(excl. BTW)
€ 71,40
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 200 - 480 | € 0,295 |
| 500 - 980 | € 0,273 |
| 1000 - 1980 | € 0,252 |
| 2000 + | € 0,242 |
*prijsindicatie
- RS-stocknr.:
- 151-535P
- Fabrikantnummer:
- STM6315RDW13F
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Manual Reset | Yes | |
| Power Fail Detection | Yes | |
| Output Driver | Open Drain RST Output | |
| Package Type | SOT-143-4 | |
| Pin Count | 4 | |
| Minimum Operating Temperature | -40°C | |
| Reset Threshold Voltage | 2.63V | |
| Reset Active Time | 1.5ms | |
| Maximum Operating Temperature | 125°C | |
| Series | STM6315 | |
| Standards/Approvals | No | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1V | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Manual Reset Yes | ||
Power Fail Detection Yes | ||
Output Driver Open Drain RST Output | ||
Package Type SOT-143-4 | ||
Pin Count 4 | ||
Minimum Operating Temperature -40°C | ||
Reset Threshold Voltage 2.63V | ||
Reset Active Time 1.5ms | ||
Maximum Operating Temperature 125°C | ||
Series STM6315 | ||
Standards/Approvals No | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1V | ||
- Land van herkomst:
- PH
The STMicroelectronics Microprocessor Reset Circuit is a low power supervisory device used to monitor power supplies. It performs a single function such as asserting a reset signal whenever the VCC supply voltage drops below a preset Value and keeping it asserted until VCC has risen above the preset threshold for a minimum period of time. It also provides a manual reset input. The open drain RST output can be pulled up to a voltage higher than VCC, but less than 6V.
Low supply current of 1.5μA
Guaranteed RST assertion down to VCC of 1.0V
Open drain RST output can exceed VCC
Power supply transient immunity