Microchip 1 Voltage Supervisor 3-Pin 1 V TO-92, MCP100-475HI/TO
- RS-stocknr.:
- 170-4301
- Fabrikantnummer:
- MCP100-475HI/TO
- Fabrikant:
- Microchip
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 170-4301
- Fabrikantnummer:
- MCP100-475HI/TO
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Sub Type | Microcontroller Reset Circuit | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Output Driver | Active Low, Push Pull | |
| Mount Type | Through Hole | |
| Package Type | TO-92 | |
| Pin Count | 3 | |
| Monitored Voltage | 4.62V | |
| Minimum Operating Temperature | -40°C | |
| Reset Threshold Voltage | 1V | |
| Maximum Operating Temperature | 85°C | |
| Series | MCP100 | |
| Standards/Approvals | No | |
| Length | 4.71mm | |
| Height | 4.62mm | |
| Automotive Standard | No | |
| Minimum Supply Voltage | 1V | |
| Maximum Supply Voltage | 5.5V | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Sub Type Microcontroller Reset Circuit | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Output Driver Active Low, Push Pull | ||
Mount Type Through Hole | ||
Package Type TO-92 | ||
Pin Count 3 | ||
Monitored Voltage 4.62V | ||
Minimum Operating Temperature -40°C | ||
Reset Threshold Voltage 1V | ||
Maximum Operating Temperature 85°C | ||
Series MCP100 | ||
Standards/Approvals No | ||
Length 4.71mm | ||
Height 4.62mm | ||
Automotive Standard No | ||
Minimum Supply Voltage 1V | ||
Maximum Supply Voltage 5.5V | ||
The Microchip MCP100 microcontroller supervisory circuit is designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It operates on 1V to 5.5V voltage range. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. This supervisor has a CMOS Push-Pull output with Active Low reset and is available in a choice of seven different trip voltages.
Holds microcontroller in reset until supply voltage reaches stable operating level
Resets microcontroller during power loss
Active low RESET pin
Push-pull output
Holds RESET for 350ms (typical)
RESET voltage (Vtrip) range between 4.5V to 4.75V
Accuracy of +(-)125mV for 5V systems and +(-)75mV for 3V systems over temp
45uA typical operating current
Temperature range between -40°C and 85°C
3-lead TO-92 package with 'H' bondout
Gerelateerde Links
- Microchip 1 Voltage Supervisor 3-Pin 1 V TO-92, MCP100-475DI/TO
- Microchip 1 Voltage Supervisor 3-Pin 50 mV TO-92, MCP100-300DI/TO
- Microchip 1 Voltage Supervisor 3-Pin 50 mV TO-92, MCP100-460DI/TO
- Microchip 1 Voltage Supervisor 3-Pin 50 mV TO-92, MCP100-315DI/TO
- Microchip 1 Voltage Supervisor 3-Pin 2.63 V TO-92, MCP100-450DI/TO
- Microchip 1 Voltage Supervisor 3-Pin 1 V TO-92
- Microchip 1 Voltage Supervisor 3-Pin TO-92
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP120-300DI/TO