STMicroelectronics 1 Voltage Supervisor 3-Pin 2.95 V SOT-23
- RS-stocknr.:
- 196-2013P
- Fabrikantnummer:
- STM1061N29WX6F
- Fabrikant:
- STMicroelectronics
Subtotaal 25 eenheden (geleverd op een doorlopende strip)*
€ 7,925
(excl. BTW)
€ 9,60
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 80,00
Op voorraad
- Plus verzending 5.425 stuk(s) vanaf 30 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 25 + | € 0,317 |
*prijsindicatie
- RS-stocknr.:
- 196-2013P
- Fabrikantnummer:
- STM1061N29WX6F
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Voltage Supervisor | |
| Sub Type | Low Power Voltage Detector | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Output Driver | Active Low, Open Drain | |
| Mount Type | Surface | |
| Package Type | SOT-23 | |
| Pin Count | 3 | |
| Minimum Operating Temperature | -40°C | |
| Reset Threshold Voltage | 2.95V | |
| Monitored Voltage | 1.6V | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Width | 1.4 mm | |
| Series | STM1061 | |
| Height | 1.12mm | |
| Length | 3.04mm | |
| Minimum Supply Voltage | 0.7V | |
| Maximum Supply Voltage | 6V | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Voltage Supervisor | ||
Sub Type Low Power Voltage Detector | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Output Driver Active Low, Open Drain | ||
Mount Type Surface | ||
Package Type SOT-23 | ||
Pin Count 3 | ||
Minimum Operating Temperature -40°C | ||
Reset Threshold Voltage 2.95V | ||
Monitored Voltage 1.6V | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Width 1.4 mm | ||
Series STM1061 | ||
Height 1.12mm | ||
Length 3.04mm | ||
Minimum Supply Voltage 0.7V | ||
Maximum Supply Voltage 6V | ||
Automotive Standard No | ||
- Land van herkomst:
- MY
The STM1061 low power voltage detector provides monitoring of battery, power-supply, and regulated system voltages. A precision voltage reference and comparator monitors the VCC input and compares it with a specified voltage threshold condition. When VCC falls below a specified trip point threshold, the output (OUT ) is forced low and remains asserted as long as the VCC input remains below VTH– + hysteresis (VHYST). The STM1061 device is guaranteed to output the correct logic state for VCC down to 0.7V. They are also designed to ignore fast transients on VCC.
This small, low power device is ideal for portable applications and is available in spacesaving SOT23-3 and SOT323-3 (SC70-3) packages.