Microchip 1 Voltage Supervisor 3-Pin SOT-23
- RS-stocknr.:
- 379-2257P
- Fabrikantnummer:
- MCP130T-475I/TT
- Fabrikant:
- Microchip
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd op een doorlopende strip)*
€ 11,90
(excl. BTW)
€ 14,40
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 25 - 95 | € 0,476 |
| 100 + | € 0,456 |
*prijsindicatie
- RS-stocknr.:
- 379-2257P
- Fabrikantnummer:
- MCP130T-475I/TT
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Output Driver | Open Drain, Active Low | |
| Mount Type | Surface | |
| Package Type | SOT-23 | |
| Pin Count | 3 | |
| Monitored Voltage | 4.62V | |
| Minimum Operating Temperature | -40°C | |
| Reset Active Time | 700ms | |
| Maximum Operating Temperature | 85°C | |
| Height | 0.95mm | |
| Length | 2.9mm | |
| Standards/Approvals | No | |
| Series | MCP130 | |
| Maximum Supply Voltage | 5.5V | |
| Automotive Standard | No | |
| Minimum Supply Voltage | 1V | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Output Driver Open Drain, Active Low | ||
Mount Type Surface | ||
Package Type SOT-23 | ||
Pin Count 3 | ||
Monitored Voltage 4.62V | ||
Minimum Operating Temperature -40°C | ||
Reset Active Time 700ms | ||
Maximum Operating Temperature 85°C | ||
Height 0.95mm | ||
Length 2.9mm | ||
Standards/Approvals No | ||
Series MCP130 | ||
Maximum Supply Voltage 5.5V | ||
Automotive Standard No | ||
Minimum Supply Voltage 1V | ||
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 MS (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current