Beha-Amprobe 2100-alpha, LED Voltage Tester, 690V ac/dc Continuity Check, Mains Powered CAT III, CAT IV RSCAL,

RS-stocknr.:: 836-4706
Fabrikantnummer:: 2100-alpha
Fabrikant:: Beha-Amprobe

Beha-Amprobe 2100-alpha, LED Voltage Tester, 690V ac/dc Continuity Check, Mains Powered CAT III, CAT IV RSCAL,

Subtotaal (1 eenheid)*

€ 158,00

(excl. BTW)

€ 191,18

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

Plus verzending 3 stuk(s) vanaf 16 maart 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 158,00

*prijsindicatie

RS-stocknr.:: 836-4706
Fabrikantnummer:: 2100-alpha
Fabrikant:: Beha-Amprobe

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Beha-Amprobe
	Product Type	Voltage Tester
	Continuity Check	Yes
	Display Type	LED
	RCD Trip Test	Yes
	IP Rating	IP64
	Battery Type	AAA
	Power Source	Mains
	Weight	320g
	Minimum Operating Temperature	-15°C
	Maximum Voltage	690V ac/dc
	Maximum Operating Temperature	55°C
	Hazardous Area Certification	No
	Standards/Approvals	No
	Width	78 mm
	Height	280mm
	Length	35mm
	Model Number	2100-alpha
	Calibrated	RSCAL
	Safety Category Voltage	690V
	Safety Category Level	CAT III, CAT IV

	Alles selecteren
	Merk Beha-Amprobe
	Product Type Voltage Tester
	Continuity Check Yes
	Display Type LED
	RCD Trip Test Yes
	IP Rating IP64
	Battery Type AAA
	Power Source Mains
	Weight 320g
	Minimum Operating Temperature -15°C
	Maximum Voltage 690V ac/dc
	Maximum Operating Temperature 55°C
	Hazardous Area Certification No
	Standards/Approvals No
	Width 78 mm
	Height 280mm
	Length 35mm
	Model Number 2100-alpha
	Calibrated RSCAL
	Safety Category Voltage 690V
	Safety Category Level CAT III, CAT IV

2100 Series Two Pole Voltage Tester

Vrijgesteld

Land van herkomst:: CN

2100-Alpha Two Pole Voltage Tester

The Beha-Amprobe 2100-Alpha is rugged, easy to use two pole voltage tester for voltage and continuity checks.

Display by LEDs 12 to 690 V a.c./d.c.

Continuity test with visual (LED) and radio indication

4 mm diameter probe extensions for easy, ergonomic measurement in sockets

Automatic AC/DC voltage detection, indication of polarity

Test of 30 mA RCD by push buttons

Work light for dark environment

IP 64

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Standards

CAT IV 600 V, CAT III 690 V

Supplied with

Users manual, GS 38 caps, 2 x 1.5V (AAA / IEC LR03) batteries (installed).