H&D Wireless SPB106-AP-1 2.7 → 3.6V WLAN Module, 802.11b/g SDIO, SPI

  • RS-stocknr. 708-0066
  • Fabrikantnummer SPB106-AP-1
  • Fabrikant H&D Wireless
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Surface mount WiFi board

The SPB106 is an SMD module with the HDG104 WLAN System-In-Package and all peripheral components required. It is a complete solution designed to be surface mounted on any host system requiring 802.11b/g WiFi. It provides up to 54Mbit/s data rate when operating in the OFDM mode and up to 11Mbit/s data rate when operating in the DSSS/CCK mode. The host interface supports SPI communication when used with the 10-pin RF-header connection (WLESS), and SDIO when used in a custom board with the AVR32UC3A3. Software drivers and a complete application example are included in Atmel AVR32 UC3B Software Framework from release 1.5.0 onwards

Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps
Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK
WEP and AES hardware encryption accelerator up to 128 bits
Chip Antenna and connector for external antenna (optional) mounted on the board
Low power consumption due to efficient class AB PA design
UMA Compliant
Advanced power management for optimum power consumption at varying load
Bluetooth co-existence support
Power Supply: +3.3V from EVK board
Small footprint 25.8 x 20.6mm

WLAN (Wireless Local Area Network) - H & D Wireless

Specificaties
Kenmerk Waarde
Supported Protocol 802.11b/g
Supported Security Standards AES, WEP
Supported Bus Interfaces SDIO, SPI
Supply Voltage 2.7 → 3.6V
Length 25.8mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -20°C
Width 20.6mm
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
33,96
(excl. BTW)
41,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
€ 33,96
2 - 4
€ 33,82
5 +
€ 33,15