Phoenix Contact 1 Channel Galvanic Barrier, Digital, ATEX

RS-stocknr.:: 709-9656
Fabrikantnummer:: 2924045
Fabrikant:: Phoenix Contact

Phoenix Contact 1 Channel Galvanic Barrier, Digital, ATEX

Subtotaal (1 eenheid)*

€ 127,74

(excl. BTW)

€ 154,57

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 2 stuk(s) vanaf 04 mei 2026
Plus verzending 11 stuk(s) vanaf 04 mei 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 127,74

*prijsindicatie

RS-stocknr.:: 709-9656
Fabrikantnummer:: 2924045
Fabrikant:: Phoenix Contact

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Phoenix Contact
	Number of Channels	1
	Product Type	Galvanic Barrier
	Barrier Type	Galvanic Barrier
	Mount Type	DIN Rail
	Hazardous Area Certification	ATEX
	Terminal Type	Push-in
	IP Rating	IP20
	Maximum Safety Current	10mA
	Minimum Operating Temperature	-20°C
	Maximum Safety Voltage	125, 253V dc
	Signal Type	Digital
	Maximum Operating Temperature	60°C
	Standards/Approvals	UL, CE, IEC, ATEX, RoHS, WEEE
	Series	MACX MCR-EX-SL-NAM

	Alles selecteren
	Merk Phoenix Contact
	Number of Channels 1
	Product Type Galvanic Barrier
	Barrier Type Galvanic Barrier
	Mount Type DIN Rail
	Hazardous Area Certification ATEX
	Terminal Type Push-in
	IP Rating IP20
	Maximum Safety Current 10mA
	Minimum Operating Temperature -20°C
	Maximum Safety Voltage 125, 253V dc
	Signal Type Digital
	Maximum Operating Temperature 60°C
	Standards/Approvals UL, CE, IEC, ATEX, RoHS, WEEE
	Series MACX MCR-EX-SL-NAM

Datasheet 2924045

Phoenix Contact Galvanic Barrier, 125V DC, 253V AC - MACX MCR-EX-SL-NAM-R-SP - 2924045

This galvanic barrier from Phoenix Contact is an isolation amplifier that isolates high DC (direct current) levels from your device while passing a low AC (alternating current) signal. The barrier provides extra safety to your electrical device by protecting your input and output circuits from each other.

If an error occurs in this unit, the LED (light-emitting diode) indicator will illuminate to let you know. There's also an indicator that signals supply voltage and switching state, making it simple to use. The device has three-way isolation, controlling two separate output signals at one time while preventing short circuit hazards and current interference for greater safety and efficiency.

This component is built for use with proximity sensors and switches in explosive atmospheres. It can also be used in other monitoring applications such as laboratory testing, technical measurements and medical equipment.

Features & Benefits

• Distinctive Phoenix Contact green colour lets you spot it easily on your DIN rail

• ATEX hazardous area certification for use in potentially explosive environments

• Broad operating temperature range of -20°C to +60°C for use in demanding conditions

• Contacts are gold-plated to prevent corrosion for long-lasting performance

Ex i NAMUR Isolating Amplifier for Proximity Sensors and Switches

The signals are transmitted via a relay output (PDT contact) to the safe area

Line fault detection (LFD), 3-way isolation, SIL 2

Group and Category

EN 61326, ATEX II (1) GD [Ex ia] IIC, Ex II 3 G Ex nAC IIC T4 X, [Ex ia] IIC; [Ex iaD]; Ex nAC IIC T4 X, SIL 2 according to EN 61508, CUL Listed, UL Listed, IECEx, UL-EX LIS / CUL-EX LIS

Approvals

CE-compliant