Carlo Gavazzi RGC1P DIN Rail Power Controller Solid State/AC 250V Analogue
- RS-stocknr.:
- 125-0690
- Artikelnummer Distrelec:
- 300-76-698
- Fabrikantnummer:
- RGC1P23V42ED
- Fabrikant:
- Carlo Gavazzi
Subtotaal (1 eenheid)*
€ 304,69
(excl. BTW)
€ 368,67
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 9 stuk(s) klaar voor verzending
- 15 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 304,69 |
*prijsindicatie
- RS-stocknr.:
- 125-0690
- Artikelnummer Distrelec:
- 300-76-698
- Fabrikantnummer:
- RGC1P23V42ED
- Fabrikant:
- Carlo Gavazzi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Carlo Gavazzi | |
| Output Type | Solid State/AC | |
| Product Type | Power Controller | |
| Maximum Current | 63A | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 70°C | |
| Terminal Type | Screw | |
| Control Type | Analogue | |
| Maximum Supply Voltage | 250V | |
| Firing Mode | Phase Angle, 16x Full Cycle, 1x Full Cycle, Soft Starting, Advanced Full Cycle, 4x Full Cycle | |
| Maximum Voltage | 1200V | |
| Display Type | LED | |
| Width | 103.5mm | |
| Standards/Approvals | EN 60947-4-3, RoHS (2011/65/EU), EN50155, EN61373, UL508, cUL (CSA 22.2 No.14-13) | |
| IP Rating | IP20 | |
| Length | 35.8mm | |
| Mount Type | DIN Rail | |
| Series | RGC1P | |
| Input Type | Analogue | |
| Panel Depth | 99mm | |
| Alles selecteren | ||
|---|---|---|
Merk Carlo Gavazzi | ||
Output Type Solid State/AC | ||
Product Type Power Controller | ||
Maximum Current 63A | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 70°C | ||
Terminal Type Screw | ||
Control Type Analogue | ||
Maximum Supply Voltage 250V | ||
Firing Mode Phase Angle, 16x Full Cycle, 1x Full Cycle, Soft Starting, Advanced Full Cycle, 4x Full Cycle | ||
Maximum Voltage 1200V | ||
Display Type LED | ||
Width 103.5mm | ||
Standards/Approvals EN 60947-4-3, RoHS (2011/65/EU), EN50155, EN61373, UL508, cUL (CSA 22.2 No.14-13) | ||
IP Rating IP20 | ||
Length 35.8mm | ||
Mount Type DIN Rail | ||
Series RGC1P | ||
Input Type Analogue | ||
Panel Depth 99mm | ||
- Land van herkomst:
- MT
RGC1P Series SSR Power Controllers
The RGC1P series of power controllers are supplied with integrated heatsink and are used to control output power of single phase loads with an analogue control input. Switching modes are selectable using a knob on the front of the controller and allows phase angle control, full cycle control, advanced full cycle control and soft starting.
The output of the RGC1P power controllers is protected against overvoltages by an integrated varistor across the output.
Features and Benefits
• 1-pole analogue switching AC solid-state contactors
• Integrated heatsink
• Selectable modes of operation;
- Phase angle
- Full cycle x1, x4 or x16
- Advanced full cycle specific for short wave infrared heaters
- Soft starting for limiting inrush current of loads having a high temperature coefficient
• Rated operational voltage up to 660 V ac
• Rated operation current up to 63 A ac
• Control inputs: 4-20 mA, 0-5 V, 1-5 V, 0-10 V, external potentiometer
• Integrated varistor protection on output
• 2 Front LEDs indicate status of load and control
• 100 kA short circuit current rating according to UL508
• DIN Rail or panel mounting
