Carlo Gavazzi RGC1P DIN Rail, Panel Power Controller AC 250V Analogue

RS-stocknr.:: 125-0691
Artikelnummer Distrelec:: 301-65-402
Fabrikantnummer:: RGC1P23V30ED
Fabrikant:: Carlo Gavazzi

Carlo Gavazzi RGC1P DIN Rail, Panel Power Controller AC 250V Analogue

Subtotaal (1 eenheid)*

€ 213,86

(excl. BTW)

€ 258,77

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

46 stuk(s) klaar voor verzending
43 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 213,86

*prijsindicatie

RS-stocknr.:: 125-0691
Artikelnummer Distrelec:: 301-65-402
Fabrikantnummer:: RGC1P23V30ED
Fabrikant:: Carlo Gavazzi

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Carlo Gavazzi
	Output Type	AC
	Product Type	Power Controller
	Maximum Current	63A
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Control Type	Analogue
	Terminal Type	Screw
	Maximum Supply Voltage	250V
	Controlled Phases	1
	Firing Mode	Soft Starting, X16, X4, Advanced Full Cycle, Phase Angle
	Maximum Voltage	660V
	Display Type	LED
	IP Rating	IP20
	Standards/Approvals	CSA 22.2 No.14-13, EN50155, EN 60947-4-3, EN61373, RoHS (2011/65/EU), UL508
	Width	70mm
	Length	35.8mm
	Series	RGC1P
	Mount Type	DIN Rail, Panel
	Input Type	Analogue
	Panel Depth	99mm

	Alles selecteren
	Merk Carlo Gavazzi
	Output Type AC
	Product Type Power Controller
	Maximum Current 63A
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Control Type Analogue
	Terminal Type Screw
	Maximum Supply Voltage 250V
	Controlled Phases 1
	Firing Mode Soft Starting, X16, X4, Advanced Full Cycle, Phase Angle
	Maximum Voltage 660V
	Display Type LED
	IP Rating IP20
	Standards/Approvals CSA 22.2 No.14-13, EN50155, EN 60947-4-3, EN61373, RoHS (2011/65/EU), UL508
	Width 70mm
	Length 35.8mm
	Series RGC1P
	Mount Type DIN Rail, Panel
	Input Type Analogue
	Panel Depth 99mm

Datasheet

Land van herkomst:: MT

Carlo Gavazzi SSR Power Controller

The Carlo Gavazzi RGC1P series SSR power controller has a solid-state contactor supplied with the integrated heatsink. It required analogue input and a current rating of 30A. It is used to control the output power of single-phase loads with an analogue control input. It has selectable switching modes regulated with a knob on the front of the controller. This also allows phase angle control, full-cycle control, advanced full-cycle control, and soft starting. The output of the power controllers is protected against overvoltages by an integrated varistor across the output.

Features and Benefits

100kA short circuit current rating

1-pole analogue switching AC solid-state contactors

2 front LEDs indicate the status of load and control

Control inputs: 4-20 mA, 0V-5V, 1V-5V, 0V-10V, external potentiometer

DIN-rail or panel mounting

Integrated heatsink

Integrated varistor protection on output

Rated operation current up to 63AAC

Rated operational voltage up to 660VAC

Selectable modes of operation are Phase angle, full-cycle x1, x4 or x16, advanced full-cycle specific for short wave infrared heaters and soft starting for limiting inrush current of loads having a high-temperature coefficient

Certifications

CE certified

cULus approved

Carlo Gavazzi RGC1P DIN Rail, Panel Power Controller AC 250V Analogue

GRATIS bezorging voor bestellingen van meer dan € 90,00

Carlo Gavazzi SSR Power Controller

Features and Benefits

Certifications

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen