Pneumatic Fittings Maintenance Kits

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components(for example tubing, fittings, adapters) and pneumatic fittings maintenance kits aid in the maintenance of these systems.

What are pneumatic fittings maintenance kits used for?

Pneumatic fittings maintenance kits contain a variety of adaptors, fittings and accessories which will keep your pneumatic system in good working order and allow you to quickly repair the system in the event of breakdown.

Types of pneumatic fittings maintenance kits

Pneumatic fittings maintenance kits may contain tube-to-tube fittings, elbows, stand pipes, PTFE (polytetrafluoroethylene) tape, tube cutters and blanking plugs.


...
Lees meer Lees minder

Filters

1 - 1 van 1 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs
RS-stocknr. 175-7097
Fabrikantnummer0950 00 00 02
FabrikantLegris
€ 429,79
Each
Aantal stuks
Related Products
The RS Pro A2 stainless steel coach bolts ...
Description:
The RS Pro A2 stainless steel coach bolts have a domed head with a square section underneath that pulls into the material or square hole. These bolts are self locking when you place them through a square hole. The coach ...
Mushroom head, square neck carriage bolts, supplied with ...
Description:
Mushroom head, square neck carriage bolts, supplied with hexagon nuts. Bolt to DIN 603Nut to DIN 555.
Stainless steel A4 Hexagon head screwsMetric thread. ...
Description:
Stainless steel A4 Hexagon head screwsMetric thread.
Hex bolts are partially threaded and can be ...
Description:
Hex bolts are partially threaded and can be used with a nut or in a tapped hole. The bolts are tightened with a wrench.Our RS Pro high tensile hexagon bolts have been designed to give you ease of assembly. Good ...