Non Resettable Fuses | 250V Fuses | RS
Log in / Registreer om gebruik te maken van uw voordelen
Onlangs gezocht

    Non Resettable Fuses

    Non-resettable fuses are single-use circuit protection devices that break a circuit when a fault is detected, offering protection to vital components. This type of fuse is designed to be mounted directly onto a printed circuit board (PCB). This type of fuse is for single use, with the fuse body and two wires that extend outside the body.

    How do non-resettable fuses work?

    Non-resettable fuses perform the role of a simple circuit breaker in a circuit. When a fault such as overcurrent or a short circuit is detected, the metal strip inside the fuse melts, stopping the flow of current and preventing damage to the circuit and any other connected devices. Once the fuse has blown, it must be replaced as it is non-resettable.

    These fuse types are often used in motors, where if overheating occurs, the power is cut before any permanent component damage occurs.

    Types of non-resettable fuses

    Non-resettable fuses can differ by their voltage and current rating, their size and their level of resistance, measured in ohms. Their body material can also vary widely, from thermoplastic to glass ceramic. This type of fuse can have a range of maximum and minimum operating temperatures.

    1883 Producten voor Non Resettable Fuses

    € 0,727
    Per stuk (geleverd op een rol)
    Bourns
    4.5A
    -
    65V dc
    T
    Ceramic
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    € 0,929
    Per stuk (geleverd op een rol)
    Bourns
    20A
    -
    32V dc
    T
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    € 1,738
    Per stuk (geleverd op een rol)
    SIBA
    4A
    -
    250V
    T
    Ceramic Tube With Filling
    -
    16mm
    4.4mm
    4.4mm
    -
    -
    1500 A @ 250 V dc, 1500 A @ 305 V ac
    -
    -
    -
    € 0,722
    Per stuk (geleverd op een rol)
    Littelfuse
    2A
    -
    32V
    F
    Ceramic
    -
    1.54mm
    0.85mm
    0.502mm
    -
    -
    -
    -55°C
    +150°C
    -
    Bourns
    5A
    -
    125V ac
    FP
    Ceramic
    -
    6.1mm
    2.6mm
    2.6mm
    -
    -
    300 A @ 32 VDC, 50 A @ 125 VAC, 50 A @ 125 VDC
    -55°C
    +125°C
    SF-2410FP-T
    Bourns
    4.5A
    -
    65V dc
    F
    Ceramic
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Schurter
    250mA
    -
    63 V dc, 125V ac
    FF
    Epoxy Glass
    -
    3.2mm
    1.6mm
    1.6mm
    -
    -
    100 A @ 125 V ac, 100 A @ 125 V ac;100 A @ 63 V dc, 100 A @ 63 V dc
    -55°C
    +90°C
    -
    Schurter
    1A
    -
    63V ac/dc
    F
    Thermoplastic
    -
    7.4mm
    3.1mm
    2.6mm
    -
    -
    50 A @ 63 V ac/dc
    -55°C
    +125°C
    -
    Schurter
    0.2A
    -
    125V ac/dc
    FF
    Ceramic
    -
    3.2mm
    1.55mm
    1.55mm
    -
    -
    300 A @ 125 V dc, 50 A @ 125 V ac
    -55°C
    +125°C
    MGA-A
    Bourns
    1.5A
    -
    125V ac
    FP
    Ceramic
    -
    6.1mm
    2.6mm
    2.6mm
    -
    -
    300 A @ 32 VDC, 50 A @ 125 VAC, 50 A @ 125 VDC
    -55°C
    +125°C
    SF-2410FP-T
    Schurter
    5A
    Radial
    250V ac
    T
    Thermoplastic
    8.5mm
    -
    -
    8.5mm
    4.3mm
    5.08mm
    50 A @ 250 V ac, 50 A @ 63 V dc
    -55°C
    +125°C
    -
    Schurter
    1A
    -
    250 V ac, 125V dc
    T
    Ceramic
    -
    11.1mm
    3.8mm
    3.9mm
    -
    -
    100 A @ 125 V dc, 200 A @ 250 V ac
    -40°C
    +85°C
    -
    Schurter
    2A
    Radial
    250V ac
    F
    Thermoplastic
    8.5mm
    -
    -
    8.5mm
    4.3mm
    5.08mm
    35 A
    -55°C
    +125°C
    -
    Schurter
    30A
    -
    72 V dc, 250V ac
    T
    Ceramic
    -
    16.2mm
    5.35mm
    5.6mm
    -
    -
    100 A @ 250 V ac
    -55°C
    +125°C
    UMT-H
    Schurter
    6.3A
    -
    32 V ac, 63V dc
    F
    Epoxy Glass
    -
    3.2mm
    1.6mm
    0.6mm
    -
    -
    63 A @ 32 V ac, 63 A @ 63 V dc
    -55°C
    +90°C
    -
    Schurter
    315mA
    Radial
    250V ac
    F
    Thermoplastic
    8.5mm
    -
    -
    8.5mm
    4.3mm
    5.08mm
    35 A
    -55°C
    +125°C
    -
    Schurter
    2.5A
    -
    32 V ac, 63V dc
    FF
    Epoxy Glass
    -
    3.2mm
    1.6mm
    0.6mm
    -
    -
    50 A @ 32 V ac, 50 A @ 63 V dc
    -55°C
    +90°C
    -
    Schurter
    315mA
    Radial
    250V ac
    F
    Thermoplastic
    8.5mm
    -
    -
    8.5mm
    4.3mm
    5.08mm
    35 A
    -55°C
    +125°C
    -
    Schurter
    1.5A
    -
    125V ac/dc
    FF
    Ceramic
    -
    3.2mm
    1.55mm
    1.55mm
    -
    -
    300 A @ 125 V dc, 50 A @ 125 V ac
    -55°C
    +125°C
    MGA-A
    Schurter
    7A
    Axial
    125V ac/dc
    F
    Ceramic
    2.36mm
    -
    -
    8mm
    34mm
    -
    300 A @ 125 V ac/V dc
    -55°C
    +85°C
    -
    Resultaten per pagina