Aluminium Capacitors

Aluminium capacitors are a type of electrolytic capacitor. A capacitor is a two-terminal electrical component that can store energy, somewhat like a battery. Aluminium capacitors are polarised, meaning that the energy can only flow in a single direction. High purity grade Aluminium is used to create the anode foil and the cathode foil upon which electrolysis is applied to form an extremely thin insulating layer of aluminium oxide, which acts as the dielectric of the capacitor. Aluminium capacitors are found in many applications such as power supplies, computer motherboards and domestic appliances.

Dependent on the nature of the Electrolyte, capacitors may also be referred to as “wet” meaning they have a liquid electrolyte or solid. Solid Electrolytes may be hybridized with Aluminium but normally refers to Polymer or Tantalum based capacitors


Types of Aluminium Capacitors


Aluminium Electrolytic Capacitors


Electrolytic capacitors consist of an electrolyte which is a liquid or gel that consists of a large concentration of ions, and when voltage is applied across its terminals, it leads to charges being stored on the anode and cathode foils. The electric charge that can be stored by the capacitor is measured in Farads but usually in the range from nanofarads to millifarads. .Aluminium capacitors are used where high capacitance values to provide smoothing and filtering functions in the circuit. Commonly used in DC Power supplies due to their large capacitance and their compact size which helps to reduce the ripple voltage. Aluminium Electrolytic capacitors have reasonable Equivalent Series Resistance (ESR) but have the lowest leakage current from all capacitor types.


Polymer Electrolytic Capacitors


Polymer capacitors (also are known as polymer electrolytic capacitors or polymer e caps) have conductive polymer as their electrolyte material within a layered aluminium design. These capacitors combine unique properties from the polymer material in terms of high conductivity, extended temperature range and no risk of drying out – to make a capacitor that offers large capacitance and very low ESR (equivalent series resistance) with high ripple current capability and offer a longer operating life. Polymer capacitors offer a lot of package options between 2.2 to 470 microfarad


Hybrid Capacitors


Hybrid capacitors (polymer hybrid aluminium capacitors) are a mix of wet electrolyte and solid polymer. In this sense, they combine the best of both electrolytes. These capacitors offer high endurance, low ESR, and a high tolerance for ripple current. Hybrid capacitors also feature stable electric characteristics at high frequencies whilst maintaining reliability. The liquid electrolyte keeps the Leakage current very low and also allows self-repairing of the aluminium foils which prevent a drop in capacitance.


...
Lees meer Lees minder

Filters

1 - 20 van 19706 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Capacitance Technology Voltage Mounting Type Dimensions Height Length Depth Diameter Minimum Operating Temperature Maximum Operating Temperature Lead Pitch Construction Lifetime
RS-stocknr. 170-1132
FabrikantRS PRO
€ 0,625
Each (In a Bag of 200)
Aantal stuks
470 µF Electrolytic 35 V dc Through Hole 13 (Dia.) x 22mm 22mm 22mm - 13mm -40°C +105°C - - 1000h
RS-stocknr. 707-6638
FabrikantRS PRO
€ 0,922
Each (In a Pack of 5)
Aantal stuks
470 µF Electrolytic 35 V dc Through Hole 13 (Dia.) x 22mm 22mm 22mm - 13mm -40°C +105°C - - 1000h
RS-stocknr. 739-6828
FabrikantnummerEEUFR1E102
FabrikantPanasonic
€ 0,696
Each (In a Pack of 5)
Aantal stuks
1000 µF Electrolytic 25 V dc Through Hole 10 (Dia.) x 20mm 20mm - - 10mm -40°C +105°C 5mm - 10000h
RS-stocknr. 122-3666
FabrikantnummerEEEFK1A221SP
FabrikantPanasonic
€ 127,40
1 Reel of 1000
Reel(s)
220 µF Electrolytic 10 V dc Surface Mount 6.3 (Dia.) x 5.8mm - - 5.8mm 6.3mm -55°C +105°C 1.8mm - 2000h
RS-stocknr. 923-2714
FabrikantnummerEEUFR1E102
FabrikantPanasonic
€ 0,372
Each (In a Bag of 200)
Aantal stuks
1000 µF Electrolytic 25 V dc Through Hole 10 (Dia.) x 20mm 20mm - - 10mm -40°C +105°C 5mm - 10000h
RS-stocknr. 106-2856
FabrikantnummerEEEFK1A221SP
FabrikantPanasonic
€ 0,294
Each (In a Bag of 20)
Aantal stuks
220 µF Electrolytic 10 V dc Surface Mount 6.3 (Dia.) x 5.8mm - - 5.8mm 6.3mm -55°C +105°C 1.8mm - 2000h
RS-stocknr. 172-6136
Fabrikantnummer50YXF10M5X11
FabrikantRubycon
€ 0,051
Each (In a Box of 3000)
Aantal stuks
10 µF Electrolytic 50 V dc Through Hole 5 (Dia.) x 11mm 11mm - - 5mm -40°C +105°C 2mm - 5000h
RS-stocknr. 315-0726
FabrikantnummerEEUFC1V221
FabrikantPanasonic
€ 0,412
Each (In a Pack of 5)
Aantal stuks
220 µF Electrolytic 35 V dc Through Hole 10 (Dia.) x 12.5mm 12.5mm - - 10mm -55°C +105°C 5mm - 3000h
RS-stocknr. 224-4325
Fabrikantnummer50YXF10M5X11
FabrikantRubycon
€ 0,324
Each (In a Pack of 5)
Aantal stuks
10 µF Electrolytic 50 V dc Through Hole 5 (Dia.) x 11mm 11mm - - 5mm -40°C +105°C 2mm - 5000h
RS-stocknr. 108-1336
FabrikantnummerEEUFC1V221
FabrikantPanasonic
€ 0,186
Each (In a Bag of 200)
Aantal stuks
220 µF Electrolytic 35 V dc Through Hole 10 (Dia.) x 12.5mm 12.5mm - - 10mm -55°C +105°C 5mm - 3000h
RS-stocknr. 103-4762
FabrikantnummerEEEFT1A221AP
FabrikantPanasonic
€ 137,20
1 Reel of 1000
Reel(s)
220 µF Electrolytic 10 V dc Surface Mount 6.3 (Dia.) x 5.8mm 5.8mm - - 6.3mm -55°C +105°C 1.8mm - 2000h
RS-stocknr. 747-2474
FabrikantnummerEEEFT1A221AP
FabrikantPanasonic
€ 0,343
Each (In a Pack of 10)
Aantal stuks
220 µF Electrolytic 10 V dc Surface Mount 6.3 (Dia.) x 5.8mm 5.8mm - - 6.3mm -55°C +105°C 1.8mm - 2000h
RS-stocknr. 173-3989
FabrikantnummerUVR1V102MHD1TO
FabrikantNichicon
€ 0,216
Each (In a Box of 500)
Aantal stuks
1000 µF Electrolytic 35 V dc Through Hole 12.5 x 20mm 20mm - - 12.5mm -40°C +85°C 5mm - 2000h
RS-stocknr. 846-7139
FabrikantnummerLLS2A332MELA
FabrikantNichicon
€ 4,46
Each
Aantal stuks
3300 µF Electrolytic 100 V dc Through Hole 25 (Dia.) x 50mm 50mm - - 25mm -40°C +85°C 10mm - 3000h
RS-stocknr. 167-1505
FabrikantnummerLLS2A332MELA
FabrikantNichicon
€ 2,891
Each (In a Bag of 250)
Aantal stuks
3300 µF Electrolytic 100 V dc Through Hole 25 (Dia.) x 50mm 50mm - - 25mm -40°C +85°C 10mm - 3000h
RS-stocknr. 862-3339
FabrikantnummerUVR1V102MHD1TO
FabrikantNichicon
€ 0,60
Each
Aantal stuks
1000 µF Electrolytic 35 V dc Through Hole 12.5 x 20mm 20mm - - 12.5mm -40°C +85°C 5mm - 2000h
RS-stocknr. 852-6294
FabrikantnummerLLS1K103MELC
FabrikantNichicon
€ 6,79
Each
Aantal stuks
10000 µF Electrolytic 80 V dc Through Hole 35 x 50mm 50mm - - 35mm -40°C +85°C 10mm - 3000h
RS-stocknr. 711-1407
FabrikantRS PRO
€ 0,048
Each (In a Pack of 100)
Aantal stuks
1 µF Electrolytic 50 V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C 2mm - 1000h
RS-stocknr. 708-3623
FabrikantnummerEEEFK1J101P
FabrikantPanasonic
€ 0,676
Each (In a Pack of 5)
Aantal stuks
100 µF Electrolytic 63 V dc Surface Mount 10 (Dia.) x 10.2mm 10.2mm - - 10mm -55°C +105°C - - 2000h
RS-stocknr. 170-1242
FabrikantRS PRO
€ 19,13
1 Bag of 1000
Bag(s)
1 µF Electrolytic 50 V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C 2mm - 1000h
Related Products
Panasonic FC Series Type V electrolytic capacitors feature ...
Description:
Panasonic FC Series Type V electrolytic capacitors feature low impedance and 1000 hours endurance at +105°C. Vibration proof options are available. These electrolytic capacitors can withstand high reflow temperatures for extended periods. AEC-Q200 qualified (some deviations apply)Half the impedance of ...
B43544 series compact aluminium electrolytic snap-in capacitors with ...
Description:
B43544 series compact aluminium electrolytic snap-in capacitors with standard 6.3mm snap-in solder pin terminals and PVC insulation. These B43544 series compact aluminium electrolytic snap-in capacitors have outstanding high ripple current capability, improved performance at high frequencies, a low ESR at ...
Long life low ESR aluminium electrolytic capacitors incorporating ...
Description:
Long life low ESR aluminium electrolytic capacitors incorporating a safety vent and insulating sleeve. Additional PCB pins are intended for mechanical connection only. It is recommended that they be soldered to the printed circuit board on isolated pads.
Long Life, snap-in electrolytic capacitor designed to offer ...
Description:
Long Life, snap-in electrolytic capacitor designed to offer high ripple current For use in SMPS, electric drives, welding, UPS and other power electronic applicationsLow equivalent series resistance (ESR)6000 Hrs (105 °C); 4 Years (+40 °C).