Soldering Iron Tips | RS
Log in / Registreer om gebruik te maken van uw voordelen
Onlangs gezocht

    Soldering Iron Tips

    Most Soldering Irons have interchangeable tips which vary in size and shape dependent on the type of soldering work you are doing. Soldering tips have an angle range from 22° to 90°. Most soldering iron tips are made of a copper core plated with iron. The copper is used for the heat transfer and the iron plate is durable. Copper corrodes easily and can eat away the tip especially in lead free soldering, iron is not. Soldering Tips can be used with various Soldering Irons so when choosing a soldering tip it’s important to ensure it is compatible with the soldering iron. TIP SHAPES:BentChiselConicalKnifeSharpBevelBladeConicalMicro-fineSemi-chiselHoofPyramid tips that have a triangular flat face and Chisel tips with a wide flat face are used for soldering sheet metal.Fine Conical or tapered chisel tips as used for electronics soldering work.TIP CLEANING:When a tip oxidises and burnt flux accumulates solder will no longer wet the tip and stops the heat transfer making it difficult to solder. This is why it is important to clean the soldering tip. Oxidising happens with all types of solder but is more frequent when using a lead free solder especially with electronic work. If you use a wet sponge to wipe the tip it helps to keep the tip clean.

    1121 Producten voor Soldering Iron Tips

    Weller
    LT AX
    Screwdriver
    WP 80, WSP 80, WXP 80
    1.6 mm
    LT
    30°
    Hakko
    T32-ILS
    Conical
    FX-8806
    0.1 mm
    T32
    -
    Weller
    RTP 012 B MS
    Bevel
    WXPP MS
    1.2 x 16.3 mm
    RT
    -
    Weller
    RTWMS 004 C X
    Conical
    WXMTS & WXMT Tweezers
    4
    RTWMS
    -
    Hakko
    FX-9701/9702
    Chisel
    FX-9701, FX-9702
    1.2 mm
    T39
    -
    Ersa
    -
    Chisel
    i-Tool
    0.8 x 1.8 mm
    Serie 102
    -
    Weller
    RTU 008 C X MS
    Bent Conical
    WXUP MS
    0.8 x 39.2 mm
    RT
    -
    Hakko
    FX-9701/9702
    Chisel
    FX-9701, FX-9702
    1.6 mm
    T39
    -
    Antex
    -
    Hot Air Tip
    Gascat 60
    -
    -
    -
    Weller
    T0050102499
    Chisel
    WXPP / WXPP MS Soldering Irons
    0.8 mm
    RTP
    -
    Weller
    RTP 025 K MS
    Knife
    WXPP MS
    2.5 x 0.3 x 17.3 mm
    RT
    -
    Weller
    RTU 020 G MS
    Gull Wing
    WXUP MS
    1.3 x 2 x 28 mm
    RT
    -
    Weller
    RTM 013 S MS
    Chisel
    WMRP-MS, WXMP-MS
    1.3 x 0.4 mm
    RT Micro Tip
    -
    Weller
    RTP 004 B MS
    Bevel
    WXPP MS
    0.4 x 16.3 mm
    RT
    -
    Weller
    RTU 004 C X MS
    Bent Conical
    WXUP MS
    0.4 x 39.2 mm
    RT
    -
    Weller
    RTP 002 S MS
    Chisel
    WXPP MS
    0.2 x 0.1 x 16.3 mm
    RT
    -
    Thermaltronics
    -
    Straight Chisel
    MFR-PS1100, MFR-PS1K, MFR-PS2200, MFR-PS2K, TMT-2000PS
    2.5 mm
    P
    30°
    Hakko
    FX-9701/9702
    Spatula
    FX-9701, FX-9702
    2 x 21.2 mm
    T39
    -
    Hakko
    FX-9701/9702
    Chisel
    FX-9701, FX-9702
    2.4 mm
    T39
    -
    Weller
    NTD
    Screwdriver
    WMP, WMPT
    4 mm
    NT
    -
    Resultaten per pagina