Ultimaker Ultimaker 2 Extended+ 3D Printer
- RS-stocknr.:
- 918-8705
- Fabrikantnummer:
- 9626
- Fabrikant:
- Ultimaker
Informatie over voorraden is momenteel niet toegankelijk
- RS-stocknr.:
- 918-8705
- Fabrikantnummer:
- 9626
- Fabrikant:
- Ultimaker
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Ultimaker | |
| Technology | FFF | |
| Build Volume | 223 x 223 x 305mm | |
| Model | Ultimaker 2 Extended+ | |
| Number of Heads | 1 | |
| Multi Material Printing | Yes | |
| Dimensions L x W x H | 493 x 342 x 688mm | |
| Filament Diameter | 2.85mm | |
| Connectivity | SD Card, USB | |
| Plug Type | Type C - European Plug, Type G - British 3-Pin | |
| Minimum Layer Height | 0.02mm | |
| Weight | 12.3kg | |
| Alles selecteren | ||
|---|---|---|
Merk Ultimaker | ||
Technology FFF | ||
Build Volume 223 x 223 x 305mm | ||
Model Ultimaker 2 Extended+ | ||
Number of Heads 1 | ||
Multi Material Printing Yes | ||
Dimensions L x W x H 493 x 342 x 688mm | ||
Filament Diameter 2.85mm | ||
Connectivity SD Card, USB | ||
Plug Type Type C - European Plug, Type G - British 3-Pin | ||
Minimum Layer Height 0.02mm | ||
Weight 12.3kg | ||
- Land van herkomst:
- NL
Ultimaker 2 Extended+ 3D Printers
The Ultimaker 2 Extended+ is the ideal 3D printer for educational, professional, engineering and design environments. It is an innovative device crafted for build volume and accuracy. The Ultimaker 2 Extended+ is 100mm tall and a layer resolution up to 20μm.
It includes:
Material spool PLA (750g)
Nozzle kit
Power adapter and cable
Glass plate
Calibration card
Hex wrenches (2mm, 2.5mm)
Spool holder
Glue stick
Magnalube (for lead screw Z motor)
USB cable
Note: Basic technical competency is recommended for set up, use, and on-going maintenance of this 3D printer throughout its lifetime. Also, any damage caused by leaving the 3D printer unattended can void the warranty.
It includes:
Material spool PLA (750g)
Nozzle kit
Power adapter and cable
Glass plate
Calibration card
Hex wrenches (2mm, 2.5mm)
Spool holder
Glue stick
Magnalube (for lead screw Z motor)
USB cable
Note: Basic technical competency is recommended for set up, use, and on-going maintenance of this 3D printer throughout its lifetime. Also, any damage caused by leaving the 3D printer unattended can void the warranty.
Features and Benefits
Build volume: up to 223 x 223 x 305mm (8.8 x 8.8 x 12in)
Layer resolution up to 20micron (0.001in)
Print head travel speed: 300mm/s
Open filament system: print with any 2.85mm material
Cura - Official Ultimaker Software use for printing purpose
221W maximum power output
Layer resolution up to 20micron (0.001in)
Print head travel speed: 300mm/s
Open filament system: print with any 2.85mm material
Cura - Official Ultimaker Software use for printing purpose
221W maximum power output
Applications
3D printing
Industrial use
Industrial use
Certifications
CE certified
Gerelateerde Links
- Ultimaker Ultimaker 2 Extended 3D Printer
- Ultimaker Ultimaker 3 Extended 3D Printer
- Ultimaker 3D Printer Parts
- Ultimaker 3D Printing Kit for use with Ultimaker 3 Extended Ultimaker S3, Ultimaker S5 0.4 mm
- Ultimaker Ultimaker 2 3D Printer
- Ultimaker Isolator for use with Ultimaker 2 Ultimaker 2+ Extended, Ultimaker 2 Extended
- Ultimaker Ultimaker 2+ 3D Printer
- Ultimaker Hot End Pack Hot End Pack for use with Ultimaker 2 Ultimaker Go