Bedrock 1.75 mm Natural ASA 3D Printing Material, 750 g
- RS-stocknr.:
- 884-376
- Fabrikantnummer:
- 5203160001
- Fabrikant:
- Bedrock
Subtotaal (1 eenheid)*
€ 72,61
(excl. BTW)
€ 87,86
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 15 stuk(s) vanaf 14 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 72,61 |
*prijsindicatie
- RS-stocknr.:
- 884-376
- Fabrikantnummer:
- 5203160001
- Fabrikant:
- Bedrock
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Bedrock | |
| Material Type | Acrylonitrile Styrene Acrylate Filament | |
| Product Type | 3D Printing Material | |
| Printing Technology | Fused Filament Fabrication (FFF) | |
| Machine Specific | Yes | |
| Colour | Natural | |
| For Use With | UltiMaker 3 FFF Printers | |
| Weight | 750g | |
| Diameter | 1.75mm | |
| Printing Material | ASA | |
| Printing Maximum Temperature | 280°C | |
| Printing Minimum Temperature | 260°C | |
| Standards/Approvals | ISO 75-2 | |
| Alles selecteren | ||
|---|---|---|
Merk Bedrock | ||
Material Type Acrylonitrile Styrene Acrylate Filament | ||
Product Type 3D Printing Material | ||
Printing Technology Fused Filament Fabrication (FFF) | ||
Machine Specific Yes | ||
Colour Natural | ||
For Use With UltiMaker 3 FFF Printers | ||
Weight 750g | ||
Diameter 1.75mm | ||
Printing Material ASA | ||
Printing Maximum Temperature 280°C | ||
Printing Minimum Temperature 260°C | ||
Standards/Approvals ISO 75-2 | ||
- Land van herkomst:
- NL
The Bedrock 3D filament is a high-performance thermoplastic is designed for demanding environments, combining the strength of ABS with enhanced UV and weather resistance for outdoor applications requiring long-lasting durability.
Exceptional weatherproof and UV-resistant properties
Standard average tensile strength of 34.6 MPa and elongation at break of 4.5%
Recommended print speed of 30 to 60 mm/s ensures efficient printing