STMicroelectronics, AC/DC Converter, 12V 16-Pin, SO-16N
- RS-stocknr.:
- 165-3175
- Fabrikantnummer:
- VIPER0PHDTR
- Fabrikant:
- STMicroelectronics
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 165-3175
- Fabrikantnummer:
- VIPER0PHDTR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | AC/DC Converter | |
| Maximum Input Voltage | 30V | |
| Maximum Output Voltage | 12V | |
| Mount Type | Surface | |
| Output Power | 12W | |
| Switching Frequency | 60MHz | |
| Pin Count | 16 | |
| Package Type | SO-16N | |
| Minimum Input Voltage | 4.5V | |
| Topology | Flyback | |
| Maximum Duty Cycle | 80% | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 10mm | |
| Height | 1.5mm | |
| Series | VIPer0P | |
| Standards/Approvals | RoHS | |
| Width | 4mm | |
| Automotive Standard | No | |
| Supply Current | 1.5mA | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type AC/DC Converter | ||
Maximum Input Voltage 30V | ||
Maximum Output Voltage 12V | ||
Mount Type Surface | ||
Output Power 12W | ||
Switching Frequency 60MHz | ||
Pin Count 16 | ||
Package Type SO-16N | ||
Minimum Input Voltage 4.5V | ||
Topology Flyback | ||
Maximum Duty Cycle 80% | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 10mm | ||
Height 1.5mm | ||
Series VIPer0P | ||
Standards/Approvals RoHS | ||
Width 4mm | ||
Automotive Standard No | ||
Supply Current 1.5mA | ||
The VIPerPlus series of high-voltage converters combines an 800 V avalanche-rugged MOSFET with a leading-edge PWM controller. With extremely low total standby consumption (less than 4 mW at 230 VAC) and high efficiency over a wide load range, VIPerPlus devices enable SMPS designs meeting the most demanding energy-saving regulations with enhanced reliability and scalability, and can cut in half the component count. The VIPer0P is characterized by a unique zero-power mode and is Ideal for all SMPS up to 7 W with a wide input voltage range.
Smart stand-by architecture using the zero-power mode (ZPM)
ZPM management by MCU easily realizable
800 V avalanche-rugged power MOSFET
Embedded HV startup and sense-FET
Current mode PWM controller
Drain current limit protection (OCP)
Jittered switching frequency reduces the EMI filter cost