FAG 6006-C 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- RS-stocknr.:
- 190-8395
- Fabrikantnummer:
- 6006-C
- Fabrikant:
- FAG
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 8,01
(excl. BTW)
€ 9,69
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 22 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 8,01 |
| 5 - 9 | € 7,67 |
| 10 - 24 | € 7,55 |
| 25 + | € 7,36 |
*prijsindicatie
- RS-stocknr.:
- 190-8395
- Fabrikantnummer:
- 6006-C
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 30 mm | |
| Outside Diameter | 55 mm | |
| Race Width | 13mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 8kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 13.5kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Limiting Speed | 18500rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 30 mm | ||
Outside Diameter 55 mm | ||
Race Width 13mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 8kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 13.5kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Limiting Speed 18500rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Gerelateerde Links
- FAG 6006-2Z 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- FAG 6006-C-2HRS 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- FAG 6006-2Z-C3 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- FAG 6006-C-2HRS-C3 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- NSK 6006 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- SKF 6006 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- Beco 6006-BHTS330 Deep Groove Ball Bearing - 30 mm ID, 55 mm OD
- SKF 6006/C3 1 Row Ball Bearing - 30 mm ID, 55 mm OD