SKF 6216-2RS1/C3 1 Row Ball Bearing - 80 mm ID, 140 mm OD
- RS-stocknr.:
- 207-6580
- Fabrikantnummer:
- 6216-2RS1/C3
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 100,14
(excl. BTW)
€ 121,17
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 100,14 |
*prijsindicatie
- RS-stocknr.:
- 207-6580
- Fabrikantnummer:
- 6216-2RS1/C3
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 80mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 140mm | |
| Race Width | 26mm | |
| Ball Material | Steel | |
| Cage Material | Sheet Metal | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 55kN | |
| Dynamic Load Rating | 72.8kN | |
| Bore Type | Parallel | |
| Series | 6216-2RS1 | |
| Standards/Approvals | No | |
| Limiting Speed | 3000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 80mm | ||
Product Type Ball Bearing | ||
Outside Diameter 140mm | ||
Race Width 26mm | ||
Ball Material Steel | ||
Cage Material Sheet Metal | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 55kN | ||
Dynamic Load Rating 72.8kN | ||
Bore Type Parallel | ||
Series 6216-2RS1 | ||
Standards/Approvals No | ||
Limiting Speed 3000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
SKF 6216-2RS1 Series Deep Groove Ball Bearing, 80mm Inside Diameter, 140mm Outside Diameter - 6216-2RS1/C3
This deep-groove ball bearing is a sealed, single-row bearing designed for rotational support in mechanical and electrical assemblies. It is intended to provide dependable radial load handling and to operate within moderate-speed systems where sealed protection and controlled internal clearance are required.
Features and Benefits:
• Sealed design reduces contamination ingress and maintenance needs
• Cylindrical bore enables straightforward shaft fitting and alignment
• Sheet-metal cage minimises friction while retaining rolling elements
• C3 internal clearance accommodates thermal expansion and shaft misalignment
• 3000 r/min limiting speed supports moderate-speed applications
• Steel ball construction delivers consistent rolling performance
• Cylindrical bore enables straightforward shaft fitting and alignment
• Sheet-metal cage minimises friction while retaining rolling elements
• C3 internal clearance accommodates thermal expansion and shaft misalignment
• 3000 r/min limiting speed supports moderate-speed applications
• Steel ball construction delivers consistent rolling performance
Applications
• Suitable for electric motor shafts requiring sealed support
• Ideal for gearbox input shafts with moderate rotational speed
• Used with conveyor rollers in automation systems
• Can be used for pump and fan assemblies in industrial equipment
• Suitable for precision assemblies in electronics manufacturing machinery
• Ideal for gearbox input shafts with moderate rotational speed
• Used with conveyor rollers in automation systems
• Can be used for pump and fan assemblies in industrial equipment
• Suitable for precision assemblies in electronics manufacturing machinery
How does the bearing cope with varying operating temperatures?
The increased internal clearance permits thermal expansion without undue preload, allowing continued smooth rotation across temperature changes.
What load capacities can be expected for shaft design calculations?
For static and dynamic assessment use the bearing’s ratings of 55 kN for static loads and 72.8 kN for dynamic loads when determining endurance and safety factors.
How should the bearing be integrated where shaft fit tolerance matters?
The cylindrical bore requires proper shaft finish and tolerance to ensure interference or transitional fits achieve the required running clearance and axial stability.
What maintenance practices are recommended given the sealed construction?
Periodic external inspection for seal integrity and monitoring operating temperature and vibration are appropriate since the Seals limit re-lubrication access.
Gerelateerde Links
- SKF 6216/C3 1 Row Ball Bearing - 80 mm ID, 140 mm OD
- SKF 6216-2RS1 1 Row Deep Groove Ball Bearing - 80 mm ID, 140 mm OD
- SKF 6216-2Z/C3 1 Row Deep Groove Ball Bearing - 80 mm ID, 140 mm OD
- FAG 6216-C3 1 Row Ball Bearing - 80 mm ID, 140 mm OD
- FAG 6216-J20AB-C3 1 Row Ball Bearing - 80 mm ID, 140 mm OD
- FAG 6216-2Z-C3 1 Row Ball Bearing - 80 mm ID, 140 mm OD
- FAG 6216-2RSR-C3 1 Row Ball Bearing - 80 mm ID, 140 mm OD
- SKF 6216 1 Row Ball Bearing - 80 mm ID, 140 mm OD