SKF 6206-2Z/C3LHT23 1 Row Ball Bearing - 30 mm ID, 62 mm OD

This ball bearing is a single-row deep-groove steel component designed to support radial and light axial loads in rotating machinery. It incorporates double shields on both sides to reduce contamination ingress while maintaining low friction, and is intended for applications requiring a balance of speed capability and load capacity.

• Double-sided shields reduce ingress while maintaining rotational efficiency
• Sheet-metal cage provides dimensional stability at elevated rotational rates
• C3 internal clearance accommodates thermal expansion during operation
• Dynamic load capacity of 20.3 kN supports sustained operational loads
• Limiting speed rated to 12,000 r/min for high-speed applications
• Static load capacity of 11.2 kN resists deformation under stationary loads

• Suitable for electric motor shaft support in Compact drives
• Ideal for gearbox idler shafts operating at high rpm
• Used with conveyor rollers subject to moderate radial loads
• Can be used for pump rotor support where contamination is present
• Appropriate for machine-tool auxiliary spindles requiring clearance compensation

The balls and rings are manufactured from steel to provide hardness and wear resistance.

The sheet-metal cage maintains ball spacing and reduces centrifugal distortion at elevated rotational rates.

Double shields on both faces hinder particulate ingress while permitting low-friction rotation.

The C3 clearance gives extra internal space to accommodate thermal growth and slight shaft misalignment.

The bearing can sustain a static load up to 11.2 kN before the risk of permanent deformation increases.