FAG 626-2Z-HLN 1 Row Ball Bearing - 6 mm ID, 19 mm OD
- RS-stocknr.:
- 260-0566
- Fabrikantnummer:
- 626-2Z-HLN
- Fabrikant:
- FAG
Subtotaal (1 verpakking van 10 eenheden)*
€ 48,13
(excl. BTW)
€ 58,24
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 90 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 4,813 | € 48,13 |
*prijsindicatie
- RS-stocknr.:
- 260-0566
- Fabrikantnummer:
- 626-2Z-HLN
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Inside Diameter | 6mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 19mm | |
| Race Width | 6mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 1.06kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 2.8kN | |
| Series | 62 | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Limiting Speed | 44500rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Inside Diameter 6mm | ||
Product Type Ball Bearing | ||
Outside Diameter 19mm | ||
Race Width 6mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 1.06kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 2.8kN | ||
Series 62 | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Limiting Speed 44500rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Vrijgesteld
Schaeffler Series 62 Ball Bearing, 6mm Inside Diameter, 19mm Outside Diameter - 626-2Z-HLN
This ball bearing is a compact, single-row deep-groove unit designed for precision rotary support in miniature assemblies. It operates across a wide temperature span and is configured with shields and a steel cage to suit demanding rotational applications within automation, electronics and mechanical systems.
Features & Benefits
• Dynamic load capacity of 2.8 kN supports sustained radial loads
• Static rating of 1.06 kN resists Peak or shock loads
• Steel shields and closed ends reduce contamination ingress
• Steel cage construction maintains efficient rolling-element spacing
• Static rating of 1.06 kN resists Peak or shock loads
• Steel shields and closed ends reduce contamination ingress
• Steel cage construction maintains efficient rolling-element spacing
**Applications**
• Suitable for high-speed spindle modules in automation equipment
• Ideal for miniature motors in specialist electronics devices
• Used with Compact gear assemblies in precision robotics
• Can be used for rotary encoders and small electrical drives
• Ideal for miniature motors in specialist electronics devices
• Used with Compact gear assemblies in precision robotics
• Can be used for rotary encoders and small electrical drives
What shaft and housing shoulder limits are relevant for mounting?
The minimum shaft-shoulder diameter to accommodate the bearing is 8.4mm and the maximum housing-shoulder diameter is 16.6mm to ensure correct axial seating.
What operating temperatures can I expect before material limits apply?
The bearing functions across a temperature range from −30°C up to 120°C, covering most industrial thermal conditions for small rotating components.
How should speed ratings be interpreted for continuous operation?
Use the limiting speed of 44,500 r/min as the absolute maximum
the reference speed of 30,500 r/min is more appropriate for prolonged service to balance life and heat generation.
Which clearance class affects axial tolerance during assembly?
The CN internal clearance designation indicates a normal clearance level that influences both preload choices and axial displacement under load.
What manufacturing materials form the rolling elements and rings?
The bearing’s balls and rings are manufactured from steel, giving standard hardness and fatigue characteristics for small-size deep-groove bearings.
Gerelateerde Links
- FAG 626-2Z-C3-HLN 1 Row Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-2RSR-HLN-C3 1 Row Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-2RSR-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-Z-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 607-2Z-HLN 1 Row Ball Bearing - 7 mm ID, 19 mm OD
- FAG 626-2RSR-C3-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 607-2Z-HLN-C3 1 Row Ball Bearing - 7 mm ID, 19 mm OD
- FAG 608-2Z-HLN 1 Row Ball Bearing - 8 mm ID, 22 mm OD