FAG 626-2RSR-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- RS-stocknr.:
- 277-6632
- Fabrikantnummer:
- 626-2RSR-HLN
- Fabrikant:
- FAG
Subtotaal (1 verpakking van 10 eenheden)*
€ 54,06
(excl. BTW)
€ 65,41
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 40 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 + | € 5,406 | € 54,06 |
*prijsindicatie
- RS-stocknr.:
- 277-6632
- Fabrikantnummer:
- 626-2RSR-HLN
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Inside Diameter | 6mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 19mm | |
| Race Width | 6mm | |
| Cage Material | Steel Sheet Metal | |
| Ball Material | Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 1.06kN | |
| Dynamic Load Rating | 2.8kN | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Series | 62-2RSR | |
| Limiting Speed | 25500rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Flange Outside Diameter | 19mm | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Inside Diameter 6mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 19mm | ||
Race Width 6mm | ||
Cage Material Steel Sheet Metal | ||
Ball Material Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 1.06kN | ||
Dynamic Load Rating 2.8kN | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Series 62-2RSR | ||
Limiting Speed 25500rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Flange Outside Diameter 19mm | ||
Vrijgesteld
- Land van herkomst:
- CN
Schaeffler 62-2RSR Series Deep Groove Ball Bearing, 6mm Inside Diameter, 19mm Outside Diameter - 626-2RSR-HLN#N10
This deep groove ball bearing provides sealed, single-row rolling support for rotating shafts in industrial assemblies. It is designed for Compact assemblies requiring sealed protection and a steel sheet cage for sustained operation across a broad temperature range. The unit is intended for use where moderate radial loads and high rotational speeds are required in automation and electrical equipment.
Features & Benefits
• Limiting speed 25,500 r/min for high-speed applications
• Basic dynamic load rating 2,800 N to resist operational radial forces
• Basic static load rating 1,060 N for short-term static loads
• Sealed on both sides to prevent contamination ingress
• Steel sheet metal cage for dimensional stability under rotation
• CN internal clearance for controlled shaft fit and preload management
• Basic dynamic load rating 2,800 N to resist operational radial forces
• Basic static load rating 1,060 N for short-term static loads
• Sealed on both sides to prevent contamination ingress
• Steel sheet metal cage for dimensional stability under rotation
• CN internal clearance for controlled shaft fit and preload management
Applications
• Suitable for high-speed motors in automation systems
• Ideal for precision fans and cooling blowers in electronics
• used with small gearboxes in robotics and actuators
• Can be used for spindles in Compact electrical tools
• Ideal for precision fans and cooling blowers in electronics
• used with small gearboxes in robotics and actuators
• Can be used for spindles in Compact electrical tools
What shaft diameter is compatible with this bearing?
The bore accepts a 6mm shaft for direct press-fit or light interference mounting.
What operating temperature range can be expected?
It functions between −30 °C and 100 °C, accommodating typical industrial environments.
How does the bearing cope with housing shoulder constraints?
The design permits a maximum housing shoulder diameter of 16.6mm and requires a minimum shaft shoulder diameter of 8.4mm for proper seating.
What are the minimum chamfer and fillet requirements for correct installation?
A minimum chamfer of 0.3mm is required and the fillet radius must not exceed 0.3mm to ensure correct ring contact.
Gerelateerde Links
- FAG 626-2RSR-C3-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-Z-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-2RSR-HLN-C3 1 Row Ball Bearing - 6 mm ID, 19 mm OD
- FAG 608-2RSR-HLN 1 Row Deep Groove Ball Bearing - 8 mm ID, 22 mm OD
- FAG 628-2RSR-HLN 1 Row Deep Groove Ball Bearing - 8 mm ID, 24 mm OD
- FAG 608-2RSR-HLN-C3 1 Row Deep Groove Ball Bearing - 8 mm ID, 22 mm OD
- FAG 626-2Z-HLN 1 Row Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-2Z-C3-HLN 1 Row Ball Bearing - 6 mm ID, 19 mm OD
