FAG S6003-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- RS-stocknr.:
- 260-0675
- Fabrikantnummer:
- S6003-2RSR-HLC
- Fabrikant:
- FAG
Subtotaal (1 eenheid)*
€ 25,68
(excl. BTW)
€ 31,07
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 44 stuk(s) vanaf 19 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 25,68 |
*prijsindicatie
- RS-stocknr.:
- 260-0675
- Fabrikantnummer:
- S6003-2RSR-HLC
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Inside Diameter | 17mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 35mm | |
| Race Width | 10mm | |
| Ball Material | Stainless Steel | |
| Cage Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 2.61kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 5.1kN | |
| Series | S60 | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Limiting Speed | 11400rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Inside Diameter 17mm | ||
Product Type Ball Bearing | ||
Outside Diameter 35mm | ||
Race Width 10mm | ||
Ball Material Stainless Steel | ||
Cage Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 2.61kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 5.1kN | ||
Series S60 | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Limiting Speed 11400rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Vrijgesteld
- Land van herkomst:
- JP
Schaeffler S60 Series Ball Bearing, 17mm Inside Diameter, 35mm Outside Diameter - S6003-2RSR-HLC
This 17 x 35 x 10 stainless steel deep-groove bearing is a sealed single-row component designed to support radial loads in rotating machinery across automation, electronics and mechanical systems. It operates within a wide temperature range and incorporates corrosion-resistant materials and a steel sheet cage to maintain performance in environments where component longevity and sealed protection are required.
Features & Benefits
• 5.1 kN dynamic load rating provides high operational capacity
• 2.61 kN static load rating sustains heavy stationary loads
• Limiting speed 11,400 r/min allows high-speed rotation
• Closed-end Seals protect internal balls from contamination
• Parallel-bore construction eases shaft mounting and alignment
• 2.61 kN static load rating sustains heavy stationary loads
• Limiting speed 11,400 r/min allows high-speed rotation
• Closed-end Seals protect internal balls from contamination
• Parallel-bore construction eases shaft mounting and alignment
**Applications**
• Suitable for Compact motor shafts in automation drives
• Ideal for precision fans and blowers in electronics cooling
• Used with gearbox input shafts in control systems
• Can be used for rotating assemblies in electrical actuators
• Suitable for small conveyor rollers in material handling
• Ideal for precision fans and blowers in electronics cooling
• Used with gearbox input shafts in control systems
• Can be used for rotating assemblies in electrical actuators
• Suitable for small conveyor rollers in material handling
What shaft shoulder and housing clearances are required for installation?
Minimum shaft shoulder diameter must be equal to or exceed 19mm and housing shoulder diameter must not exceed 33 mm to ensure correct seating.
What operating temperatures can be expected without compromising materials?
The unit is rated for continuous operation from −30°C up to 100°C under normal loading.
How does cage material affect bearing behaviour under shock loads?
The steel sheet-metal cage offers good rigidity and load distribution, improving performance under intermittent shock and vibration.
What are the fatigue and mass characteristics relevant to dynamic design?
The fatigue load limit is 166 N and the component mass is 39 g, useful for dynamic balancing and lifetime estimations.
Gerelateerde Links
- FAG S6003-2RSR-FD 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- FAG S6203-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG S6303-2RSR-HLC 2 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG 61903-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 30 mm OD
- FAG 61803-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 26 mm OD
- FAG S6007-2RSR-HLC 1 Row Ball Bearing - 35 mm ID, 62 mm OD
- FAG S6207-2RSR-HLC 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- FAG 61907-2RSR-HLC 1 Row Ball Bearing - 35 mm ID, 55 mm OD