FAG 61903-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 30 mm OD

Subtotaal (1 eenheid)*

€ 21,08

(excl. BTW)

€ 25,51

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 15 stuk(s) vanaf 23 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 21,08

*prijsindicatie

RS-stocknr.:
260-0696
Fabrikantnummer:
61903-2RSR-HLC
Fabrikant:
FAG
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

FAG

Inside Diameter

17mm

Product Type

Ball Bearing

Outside Diameter

30mm

Race Width

7mm

Race Material

Bearing Steel

Cage Material

Steel

Ball Material

Steel

End Type

Closed

Number of Rows

1

Internal Clearance

CN

Static Load Rating

2.56kN

Dynamic Load Rating

4.59kN

Standards/Approvals

No

Series

619-2RSR

Bore Type

Cylindrical

Limiting Speed

12700rpm

Flange Outside Diameter

30mm

Race Type

Deep Groove

Bearing Type

Single Row Deep Groove Ball

Vrijgesteld

Schaeffler 619-2RSR Series Ball Bearing, 30mm Outside Diameter, 17mm Inside Diameter - 61903-2RSR-HLC


This ball bearing is a sealed single-row deep-groove radial bearing designed to support rotational loads in Compact assemblies. It operates across a wide temperature range and is suitable for applications requiring sealed protection and steel construction while maintaining high rotational capability.

Features and Benefits:


• Sealed construction limits contamination and reduces maintenance
• Steel cage offers Durable retention under continuous operation
• Internal clearance CN provides predictable axial and radial play
• Static load capacity 2.56 kN resists high stationary loads
• Dynamic load capacity 4.59 kN supports sustained radial loading
• Limiting speed 12,700 r/min enables high-speed miniature operation

Applications


• Suitable for precision motor shafts in Compact drives
• Ideal for small gearbox and transmission bearings
• Used with rotary actuators in automation equipment
• Can be used for wheel hubs in lightweight mechanisms
• Appropriate for instrumentation spindles requiring sealed units

What shaft and housing interfaces are required for correct mounting?


Minimum shaft shoulder diameter must allow a 19 mm seating and housing shoulder must not exceed 28 mm to ensure correct axial seating and ring engagement.

What operating temperatures can be expected without seal compromise?


The bearing functions from −30 °C up to 100 °C while retaining sealing integrity for typical industrial environments.

How should fillet and chamfer dimensions be accommodated during design?


Design fillet radii no larger than 0.3 mm and provide a minimum chamfer depth of 0.3 mm to avoid interference with ring edges.

What is the typical mass to consider in rotating assemblies?


The component mass is 17 g, which should be included when calculating rotor inertia and balance.

Which running clearance and fatigue limit relate to life predictions?


The internal clearance classification CN and a radial fatigue load limit of 150 N are the parameters used for bearing life and endurance calculations.

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.