FAG S6005-2RSR-HLC 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- RS-stocknr.:
- 260-0679
- Fabrikantnummer:
- S6005-2RSR-HLC
- Fabrikant:
- FAG
Subtotaal (1 eenheid)*
€ 42,53
(excl. BTW)
€ 51,46
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 8 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 42,53 |
*prijsindicatie
- RS-stocknr.:
- 260-0679
- Fabrikantnummer:
- S6005-2RSR-HLC
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Inside Diameter | 25mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 47mm | |
| Race Width | 12mm | |
| Race Material | Corrosion Resistant Material | |
| Cage Material | Steel | |
| Ball Material | Stainless Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 4.68kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 8.55kN | |
| Standards/Approvals | No | |
| Series | S60 | |
| Bore Type | Parallel | |
| Limiting Speed | 8400rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Inside Diameter 25mm | ||
Product Type Ball Bearing | ||
Outside Diameter 47mm | ||
Race Width 12mm | ||
Race Material Corrosion Resistant Material | ||
Cage Material Steel | ||
Ball Material Stainless Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 4.68kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 8.55kN | ||
Standards/Approvals No | ||
Series S60 | ||
Bore Type Parallel | ||
Limiting Speed 8400rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Vrijgesteld
- Land van herkomst:
- JP
Schaeffler S60 Series Ball Bearing, 25mm Inside Diameter, 47mm Outside Diameter - S6005-2RSR-HLC
This ball bearing is a sealed, single-row deep groove unit designed for rotational support in precision electromechanical assemblies. It is built with corrosion-resistant rings and stainless steel rolling elements to perform reliably in applications requiring sealed protection and Compact radial load handling. The bearings construction suits integration where a parallel bore and closed ends are required for straightforward mounting and containment.
Features & Benefits
• Dynamic load capacity 8.55 kN for sustained radial forces
• Static load capacity 4.68 kN to withstand Peak loads
• Limiting speed 8,400 r/min for high-speed operation
• Internal clearance CN enabling consistent running accuracy
• Steel cage with stainless balls for corrosion resilience
• Sealed (2RSR) design to reduce contamination ingress
• Static load capacity 4.68 kN to withstand Peak loads
• Limiting speed 8,400 r/min for high-speed operation
• Internal clearance CN enabling consistent running accuracy
• Steel cage with stainless balls for corrosion resilience
• Sealed (2RSR) design to reduce contamination ingress
**Applications**
• Suitable for precision motors in automation equipment
• Ideal for small gearbox input shafts in robotics
• Used with rotary encoders in electronic control systems
• Can be used for spindle supports in test fixtures
• Used for shaft support in electrical actuators
• Ideal for small gearbox input shafts in robotics
• Used with rotary encoders in electronic control systems
• Can be used for spindle supports in test fixtures
• Used for shaft support in electrical actuators
What mounting considerations should I allow for shoulder clearances?
Ensure shaft shoulder diameter and housing shoulder limits meet the components mounting dimensions: the minimum shaft shoulder diameter and maximum housing shoulder diameter must be observed to avoid ring interference and ensure proper seating.
How does temperature affect suitability for different environments?
The bearing operates between −30°C and 100°C, so it is suitable for most indoor industrial settings and many outdoor applications within that temperature range.
What are the recommended fillet and chamfer allowances during installation?
Respect the maximum fillet radius of 0.6 mm and minimum chamfer of 0.6 mm to prevent contact with the ring corners and to allow correct axial seating.
How does fatigue limit relate to service life estimation?
Use the radial fatigue limit Value of 310 N when calculating bearing life under recurring load cycles to assess endurance under given operating loads.
Gerelateerde Links
- FAG S6005-2RSR>N 1 Row Deep Groove Ball Bearing - 25 mm ID, 47 mm OD
- FAG S6303-2RSR-HLC 2 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG 61906-2RSR-HLC 1 Row Ball Bearing - 30 mm ID, 47 mm OD
- FAG 61807-2RSR-HLC 1 Row Ball Bearing - 35 mm ID, 47 mm OD
- FAG S6205-2RSR-HLC 1 Row Ball Bearing - 25 mm ID, 52 mm OD
- FAG 61805-2RSR-HLC 1 Row Ball Bearing - 25 mm ID, 37 mm OD
- FAG S6305-2RSR-HLC 1 Row Ball Bearing - 25 mm ID, 62 mm OD
- FAG S6200-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 30 mm OD
